Diamond on GaN integration for power semiconductor devices with efficient thermal management
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Scaling of semiconductor devices has pushed CMOS devices close to fundamental limits. The remarkable success story of Moore's law during the last 40 years, predicting the evolution of electronic device performances related to miniaturization, has always be ...
The authors report on InGaN microcavity light-emitting diodes with an effective thickness of similar to 450 nm at the emission wavelength of similar to 415 nm. The starting material for the flip-chip laser lift-off device is a structure with an active regi ...
Gallium Nitride (GaN) and its ternary alloys with aluminium and indium have met a growing interest in the last decade. These semiconductors have a large direct bandgap and can be doped with either silicon (Si) for n-type and magnesium (Mg) for p-type layer ...
High-electron mobility transistors (HEMTs) were fabricated from heterostructures consisting of undoped In0.2Al0.8N barrier and GaN channel layers grown by metal-organic vapor phase epitaxy on (0001) sapphire substrates. The polarization-induced two-dimensi ...
AlInN/GaN unpassivated High Electron Mobility Transistor (HEMT) on Sapphire substrate has yielded a maximum drain current density close to 2 A/mm in steady state. Superior gate length downscaling than AlGaN/GaN devices has been observed owing to the possib ...
Using surface micromachining technology, we fabricated nanofluidic devices with channels down to 10̂nm deep, 200̂nm wide and up to 8̂cm long. We demonstrated that different materials, such as silicon nitride, polysilicon and silicon dioxide, combined with ...
A heat sink that is particularly suitable for semiconductor components is made from a diamond-containing composite material. In addition to a diamond fraction amounting to 40-90% by volume, the composite material also contains 7 to 59% by volume copper or ...
Stencil lithography is an innovative method for patterning that has a great flexibility from many points of view. It is based on shadow mask evaporation using thin silicon nitride membranes that allow the patterning of sub-100 nm features up to 100 μm in a ...
The objective of this paper is to present the fundamental phenomena occurring during the scribing and subsequent fracturing process usually performed when preparing surfaces of brittle semiconductors. In the first part, an overview of nano-scratching exper ...
We study the interfacial electronic properties of a model Si-SiO2-Si structure which is intended to simulate the substrate-oxide-polysilicon stack in metal-oxide-semiconductor devices. The structural properties of this model are shown to match closely thos ...
