Publication

GeSn as next-generation material for short-wave infrared single-photon detection

Andrea Giunto
2023
EPFL thesis
Abstract

In recent years, the automotive industry has aspired to bring self-driving vehicles to the generalpublic and light detection and ranging (LiDAR) sensors have emerged as the preferred solution forcar vision systems. At present, LiDAR technologies employ expensive Indium-based III-V materialsfor optimal performance. However, in view of future mass production of the technology, thisapproach is not sustainable due to the reliance on In, a scarce element already extensively used inthe semiconductor industry.In this context, this thesis explores the potential of GeSn as absorber material for single-photondetection in the short-wave infrared wavelengths to replace the current commercial III-V technologyemployed in LiDARs. Ge and Sn are more abundant elements compared to In, making thema more sustainable option for single-photon avalanche photodiodes (SPADs). Furthermore, thepossibility of monolithic integration of GeSn thin films on Si platforms allows for the utilization oflower amounts of these elements in contrast with III-V SPADs, where In constitutes the bulk ofthe device. Nevertheless, the use of the GeSn semiconductor comes with fundamental materialscience challenges related to the material metastability and electrically active defects arising fromthe thin film growth process on Si substrates.In this thesis, we propose to integrate a GeSn absorber on a Ge-buffered Si diode to achieve single photondetection targeting the wavelength of 1.55 &m. We aimed to demonstrate an all-group-IVSPAD device by epitaxially growing the Ge/GeSn absorber stack employing magnetron sputteringas the deposition method preferred for high-volume semiconductor production.The thesis starts with a review of the physics of SPAD devices, justifying the need of GeSn asabsorber material to access the wavelength of 1.55 &m in all-group-IV devices. Subsequently, Ipresent a detailed assessment of the understanding of the optoelectronic properties of Ge andGeSn thin films in the literature, reviewing additionally the works on sputtered epitaxial Ge andGeSn films. I then discuss the results of our scientific research in four chapters, each focused on adifferent layer composing the SPAD device.We first investigate the in situ p-type doping of GeSn by In, and show that In acts as a surfactantduring the epitaxial growth of GeSn, inducing phase separation via the formation of Sn-In liquiddroplets.Next, we move to the bulk of the research of the thesis, which involved extensive characterizationof epitaxial Ge and GeSn films grown by the magnetron sputtering method. We demonstratesuccessful epitaxy of both materials, evidencing the critical influence of the substrate latticemismatch in inducing defects in the film. We additionally provide characterization of the electricalproperties of GeSn, which showed to be promising but affected by high impurity levels in the films due to contamination in the employed sputtering tools.In the third section, we demonstrate the viability of flash-lamp annealing of Ge buffers as CMOS-compatibleannealing process, shedding light on the influence of Si-Ge intermixing in determinethe final defect density.Lastly, we present the design of a GeSn-on-Si SPAD structure and present results on their optoelectroniccharacteristics with sputtered GeSn, correlating them with the material's electricalproperties.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (39)
Doping (semiconductor)
In semiconductor production, doping is the intentional introduction of impurities into an intrinsic semiconductor for the purpose of modulating its electrical, optical and structural properties. The doped material is referred to as an extrinsic semiconductor. Small numbers of dopant atoms can change the ability of a semiconductor to conduct electricity. When on the order of one dopant atom is added per 100 million atoms, the doping is said to be low or light.
Avalanche photodiode
An avalanche photodiode (APD) is a highly sensitive semiconductor photodiode detector that exploits the photoelectric effect to convert light into electricity. From a functional standpoint, they can be regarded as the semiconductor analog of photomultiplier tubes. The avalanche photodiode (APD) was invented by Japanese engineer Jun-ichi Nishizawa in 1952. However, study of avalanche breakdown, microplasma defects in silicon and germanium and the investigation of optical detection using p-n junctions predate this patent.
Epitaxy
Epitaxy (prefix epi- means "on top of”) refers to a type of crystal growth or material deposition in which new crystalline layers are formed with one or more well-defined orientations with respect to the crystalline seed layer. The deposited crystalline film is called an epitaxial film or epitaxial layer. The relative orientation(s) of the epitaxial layer to the seed layer is defined in terms of the orientation of the crystal lattice of each material.
Show more
Related publications (46)

Advanced Silicon and SWIR Single-Photon Avalanche Diodes: Design, Simulation, and Characterization

Ekin Kizilkan

Low-level light detection with high spatial and timing accuracy is a growing area of interest by virtue of applications such as light detection and ranging (LiDAR), biomedical imaging, time-resolved Raman spectroscopy, and quantum applications. Single-phot ...
EPFL2024

Silicon CMOS and InGaAs(P)/InP SPADs for NIR/SWIR detection

Utku Karaca

Applications demanding imaging at low-light conditions at near-infrared (NIR) and short-wave infrared (SWIR) wavelengths, such as quantum information science, biophotonics, space imaging, and light detection and ranging (LiDAR), have accelerated the develo ...
EPFL2024

Semiconductor-based device architectures in multimaterial fibers

William Nicolas Duncan Esposito

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...
EPFL2023
Show more
Related MOOCs (3)
Micro and Nanofabrication (MEMS)
Learn the fundamentals of microfabrication and nanofabrication by using the most effective techniques in a cleanroom environment.
Microstructure Fabrication Technologies I
Learn the fundamentals of microfabrication and nanofabrication by using the most effective techniques in a cleanroom environment.
Micro and Nanofabrication (MEMS)
Learn the fundamentals of microfabrication and nanofabrication by using the most effective techniques in a cleanroom environment.

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.