Piezoelectric acoustic sensors and ultrasonic transducers based on textured PZT thin films
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Diffraction gratings integrated with micro-electro-mechanical-systems (MEMS) offer shot noise limited subnanometer displacement detection sensitivities but are limited in detection range for mechanical transducers. A two-wavelength readout method is develo ...
Institute of Electrical and Electronics Engineers2007
Micro-system for active vibratory insulation, characterised in that it comprises a stand which includes a frame (1) and at least two beams (2a, 2b) which interlock and carry or are intended to carry an element requiring stabilisation (3), said beams (2a, 2 ...
Novel, highly sensitive piezoelectric acoustic sensors based on partially unclamped Pb(Zr-x, Ti1-x)O-3 (PZT) coated cantilever and bridge have been fabricated by silicon micromachining. High sensitivity at low frequencies (5-100 Hz) has been achieved by pa ...
Cantilever-based detection of ultrasmall forces is of great interest for several applications such as magnetic resonance force miscroscopy (MRFM) where an ultrahigh sensitive cantilever is used to detect magnetic resonance in small ensembles of electron or ...
Bandpass filters for microwave frequencies realized with thin film bulk acoustic wave resonators (FBAR) are a promising alternative to current dielectric or surface acoustic wave filters for use in mobile telecommunication applications. With equivalent per ...
The continuous downscaling of microelectronic circuits combined with increasing interest in ferroelectric thin films for non-volatile random access memories (FeRAM) is drawing great attention to small ferroelectric thin film structures. There are various c ...
We describe a combination of 100-mm wafer scale deep-ultraviolet (DUV) exposure and a microelectromechanical systems (MEMS) process to fabricate silicon nitride membranes with submicrometer apertures to be used as miniature shadow masks or nanostencils. Ap ...
High-Q, bulk acoustic wave composite resonators based on a symmetric layer sequence Of SiO2-A1N-SiO2 sandwiched between electrodes have been developed. Acoustic isolation was achieved by means of deep silicon etching to obtain membrane type TFBAR's. Three ...
Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2007
Ultrasonic machining is performed using closed-loop Z-axis position and force control. Micromachining requires tools smaller than 100 micrometers in diameter, necessitating the use of forces in the low mN range. ...
Univ Nebraska-Lincoln, Industrial & Management Systems Engineering, Lincoln, Ne 68588 Usa2007
We describe a combination of 100-mm wafer scale deep-ultraviolet (DUV) exposure and a microelectromechanical systems (MEMS) process to fabricate silicon nitride membranes with submicrometer apertures to be used as miniature shadow masks or nanostencils. Ap ...
