Novel full platinum nanoprobes suitable for biological SPM experiments
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
An epitaxial 200 nm thick film of Pb(Zr0.40Ti0.60)O-3 (PZT) has been deposited by reactive rf magnetron sputtering on conductive Nb-doped SrTiO3 (100) (STO). The patterning process involved electron-beam lithography of polymethylmethacrylate, fabrication o ...
Our recent developments concerning the fabrication of polymer microchips and their applications for biochemical analyses are reviewed. We first describe two methods of fabrication of polymer microfluidic chips, namely UV-laser photoablation and plasma etch ...
We present powder blasting as a new technology for the realization of Micro Electro-Mechanical Systems (MEMS). The technique is base don the erosion of a masked substrate by a high velocity powder beam. We study the erosion rate of the process using glass ...
We present an optical investigation of GaN pillars using both micro-Raman (mu-Raman) and microphotoluminescence (mu-PL) spectroscopy. GaN pillars of diameter ranging from 100 nm to 5 mum were fabricated by electron beam lithography and reactive ion etching ...
We report on powder blasting as a promising technology for the three-dimensional structuring of brittle materials. We investigate the basic parameters of this process, which is based on the erosion of a masked substrate by a high-velocity eroding powder be ...
A new surface micromachining method based on porous silicon formation followed by electropolishing is presented in this paper. It generates in a single electrochemical etch step a plate of porous silicon, releases it from the substrate without using a sacr ...
We have designed and realised a new type of microsystem for the electrical characterisation of arrays of living cells for biomedical diagnostic purposes. We have used deep plasma etching for the fabrication of microholes and micro-fluidic channels in silic ...
We report about a new process we have developed to fabricate miniaturized double layer octupoles that can be operated as electrostatic scanner/stigmators for charged particle beams. The fabrication process is based on deep reactive ion etching (DRIE) and a ...
We describe a new O-ring setup for wet-etching processes of microelectromechanical systems (MEMS) . Our new low-cost approach using siloxane-based seal rings entails the single-side etching of silicon and silicon dioxide using potassium hydroxide and buffe ...
A multiple-angle liquid crystal blazed grating beam deflector has been developed. It consists of a stack of liquid crystal blazed gratings where each layer can deflect incident light with very high efficiency into one of two different directions depending ...
Spie-Int Soc Optical Engineering, Po Box 10, Bellingham, Wa 98227-0010 Usa1998
