Localized electrochemical deposition of copper monitored using real-time X-ray microradiography
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
One of the main challenges for silicon thin film deposition for solar cell applications is to achieve high rate deposition in order to reduce the manufacturing costs. However, when silane and hydrogen are used as precursor gas in parallel plate plasma-enha ...
Nanowire superconducting single photon detectors (SSPDs) [1] are characterized by very high sensitivity in the near infrared (detection efficiency η up to 30%, for a dark count rate DK of few Hz), speed (up to ∼1 GHz repetition rate) and time resolution (j ...
Erbium-doped amorphous aluminum oxide layers deposited on Si or oxidized silicon substrates are promising construction pieces for future monolytic integrated optoelectronics devices. In a novel high-vacuum chemical vapor deposition setup the alumina films ...
DC reactive magnetron sputtering was used for the deposition of Zr–Si–N thin films. Four series of samples have been deposited at various substrate temperatures TS: 300 K, 510 K, 710 K and 910 K. Depending on TS, different N2 partial pressures pN2 were req ...
Focused Electron Beam Induced Deposition (FEBID) is a rapid prototyping technique for the investigation, production and modification of 2 and 3-D nanostructures. The process takes place at room temperature, in the high-vacuum chamber of a Scanning Electron ...
The deposition of amorphous alumina (Al2O3) films on four inch wafers with high deposition rate (up to 50 nm/min) by an advanced HV-CVD technique is discussed. Amorphous nature of the films is confirmed by X-ray diffraction. Refractive index of the deposit ...
Pulse plating of nickel-tungsten alloys has been studied from two citrate ammonia based model electrolytes containing either an excess of nickel or an excess of tungsten. The alloy composition and current efficiency were determined for pulse periods rangin ...
A laser or electron beam assisted deposition in HV-CVD conditions was used in order to achieve structured amorphous alumina (Al2O3) deposits. Selective deposition of Al2O3 in the irradiated regions has been demonstrated. We investigate the influence of irr ...
We analyzed along this work the feasibility to produce high quality alumina thin films by High Vacuum Chemical Vapor Deposition (HV-CVD). We study the influence of various parameters on the growth process and on the film quality, such as substrate temperat ...
The addition of carbon to samples, during transmission electron microscope imaging, presents a barrier to accurate analysis; the controlled deposition of hydrocarbons by a focused electron beam can be a useful technique for local nanometer-scale sculpting ...
