Publication

EBSD study of variant reorientation, texture, and twin formation in a martensitic NiTi alloy deformed in compression

Related publications (30)

Concrete cancer : characterization of Alkali Silica Reaction early stage products by electron microscopy

Concrete deterioration is a natural process, which has to be carefully monitored over a the service life of a structure. The Alkali-Silica Reaction (ASR) is a slow-process degradation, which devel-ops over decades and is therefore difficult to predict. Sin ...

EPFL2022

Light emission properties of mechanical exfoliation induced extended defects in hexagonal boron nitride flakes

Anna Fontcuberta i Morral, Nicolas Tappy

Recently, hexagonal boron nitride (hBN) has become an interesting platform for quantum optics due to its peculiar defect-related luminescence properties. Concomitantly, hBN was established as the ideal insulating support for realizing 2D materials devices, ...

IOP Publishing Ltd2022

Strengthening mechanisms in dilute and random solid solution high-entropy BCC alloys

Alireza Ghafarollahi

Tuning the mechanical properties of metals, including strength, through adjusting the type and/or concentration of added solute elements, has been recognized as an effective way to design and produce materials with desired or optimized mechanical propertie ...

EPFL2022

Structure analysis of beta dicalcium silicate via scanning transmission electron microscope (STEM)

Franco Alberto Zunino Sommariva, Qiao Wang, Junying Zhao, Chaoqi Shi

Beta-dicalcium silicate (beta-C2S), one of the main phases in Portland cement clinker, offers some promising overviews regarding CO2 and energy savings potential compared to alite. Understanding the crystalline structure and reactive sites on beta-C2S surf ...

ELSEVIER SCI LTD2022

Characterization of shear deformations in reinforced concrete members without shear reinforcement

Aurelio Muttoni, Miguel Fernández Ruiz, Raffaele Cantone, Andri Setiawan

The load-carrying capacity of many reinforced concrete structures is governed by shear failures, occurring before reaching the flexural capacity of the member. For redundant systems, such as slabs subjected to concentrated loads, local shear failures (typi ...

2022

Experimental quantification of 3D deformations in sensitive clay during stress-probing

Edward Carlo Giorgio Andò

Unique four-dimensional (4D) deformation data are collected during drained triaxial tests on intact specimens of a natural sensitive clay. This requires the development of a miniature triaxial cell for advanced stress path testing, specifically designed fo ...

ICE PUBLISHING2022

Effect of post-heat treatment conditions on shape memory property in 4D printed Fe-17Mn-5Si-10Cr-4Ni shape memory alloy

Christian Leinenbach, Irene Ferretto

The influence of post-heat treatment on the microstructure and properties of 4D printed Fe-17Mn-5Si-10Cr-4Ni (wt. %) shape memory alloy (SMA) produced via a laser powder bed fusion process is investigated in this study. It is shown that heat-treatment temp ...

2022

The thermally activated deformation behaviour of single-crystalline microcast aluminium wires

Andreas Mortensen, Léa Deillon, Suzanne Godelieve Alphonsine Verheyden

A microcasting process is used to produce high aspect ratio ( > 30) monocrystalline pure aluminium wires with a diameter between 14 and 115 mu m. The role of thermal activation in the plastic deformation of these microwires is measured by means of (single) ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Fiber Buckling in Confined Viscous Flows: An Absolute Instability Described by the Linear Ginzburg-Landau Equation

François Gallaire, Jean Cappello

We explore the dynamics of a flexible fiber transported by a viscous flow in a Hele-Shaw cell of height comparable to the fiber height. We show that long fibers aligned with the flow experience a buckling instability. Competition between viscous and elasti ...

AMER PHYSICAL SOC2022

Mechanics of alkali-silica reaction in concrete across scales

Emil Gallyamov

Alkali-silica reaction occurs in concrete between the alkalis contained in the pore solution and silica in the aggregates. Generation of ASR products gives rise to the internal pressures that cause expansion and cracking. Due to its deleterious effect on c ...

EPFL2022