Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...
Laser-induced forward transfer (LIFT) technique is an emerging micro additive manufacturing (AM) technique that has been widely used to print a variety of materials. Distinguished from other nozzle-based AM techniques, LIFT operates without the existence o ...
Over the last decades, three-dimensional micro-manufacturing of fused silica via near-infrared ultrafast laser exposure combined with an etching step has become an established technique for producing complex three-dimensional components. Here, we explore t ...
During this project, the microfabrication of Hafnium Carbide (HfC) was investigated. Multiple tools were considered and tested for their compatibility and effectiveness when working with HfC. The main method of choice for the machining of HfC thin films wa ...
HfC has been very under-investigated due to its rarity and synthesising difficulty. Its potential for MEMS and NEMS applications has been recognized and is the object of an ongoing feasibility study for production since 2022. We continue on this impulse by ...
Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...
This work extends the range of pathways for the production of metallic microcomponents by downscaling metal casting. This is accomplished by using either of two different molding techniques, namely femtosecond laser micromachining or lithographic silicon m ...
The project focuses on etching properties of the atomic layer deposition (ALD) of Al2O3. For this purpose, etching processes such as plasma etch with sulfur hexafluoride (SF6), gas etch with xenon difluoride (XeF2), wet etch with MIF developer (726 MIF) as ...
The objective of this semester project is the fabrication of suspended piezoelectrically transduced resonators and to test and compare the quality of the piezoelectric layer using different processes and parameters. A functional fabrication process by lift ...
Photonic integrated circuits have the potential to pervade into multiple applications traditionally limited to bulk optics. Of particular interest for new applications are ferroelectrics such as Lithium Niobate, which exhibit a large Pockels effect, but ar ...
