Publications associées à Stéréolithographie

A review of materials used in tomographic volumetric additive manufacturing

Christophe Moser, Jorge Andres Madrid Wolff, Riccardo Rizzo

Volumetric additive manufacturing is a novel fabrication method allowing rapid, freeform, layer-less 3D printing. Analogous to computer tomography (CT), the method projects dynamic light patterns into a rotating vat of photosensitive resin. These light pat ...

SPRINGER HEIDELBERG2023

Biocompatible and Biodegradable 3D Printing from Bioplastics: A Review

Sandro Carrara

There has been a lot of interest in developing and producing biodegradable polymers to address the current environmental problem caused by the continued usage of synthetic polymers derived from petroleum products. Bioplastics have been identified as a poss ...

MDPI2023

FABRICATION AND ANALYSIS OF THIN FILM LITHUM NIOBATE RESONATORS FOR 5GHz FREQUENCY AND LARGE k(t)(2) APPLICATIONS

Luis Guillermo Villanueva Torrijo, Seniz Esra Küçük, Soumya Yandrapalli, Victor Plessky

This work presents the fabrication and analysis of suspended thin film Lithium Niobate resonators. The yield of the new fabrication process presented below is >90% showing devices with high k(t)(2) of 28% resonators at 5GHz, making them suitable for high f ...

IEEE2021

High-resolution tomographic volumetric additive manufacturing

Christophe Moser, Paul Delrot, Damien Claude-Marie Loterie

Tomographic additive manufacturing produces complex parts with a wide range of printable materials but remains limited in terms of resolution. Here, the authors tune the etendue of the light source and accurately control the photopolymerization kinetics us ...

Nature Publishing Group2020

3D Printing and Supercritical Foaming of Hierarchical Cellular Materials

Matteo Gregorio Modesto Marascio

Hierarchical porous structures have been gathering interest in different fields owing to their unique properties associated with their multi-scale features. The observation of natural materials brought new insights into the functionality of cellular materi ...

EPFL2018

Study of additive manufactured microwave cavities for pulsed optically pumped atomic clock applications

Anja Skrivervik, Emile Jacques de Rijk

Additive manufacturing (AM) of passive microwave components is of high interest for the cost-effective and rapid prototyping or manufacture of devices with complex geometries. Here, we present an experimental study on the properties of recently demonstrate ...

AIP American Institute of Physics2018

Soft Magnets Implementation using a Stereolithography-based 3D Printer

Yves Perriard, Paolo Germano, Cécile Gisèle Aimée Jeannine Cuchet, Augustin Muster

A wide part of the proposed paper is devoted to designing soft magnets using a stereolithography 3D printer. A state of the art on soft magnetic materials is carried out together with an overview of the existing printing technologies to obtain complex non- ...

2017

Single microbe trap and release in sub-microfluidics

Andreas Vasdekis

Life on Earth is comprised mostly of microbes with significant implications in disease and carbon cycling. However, their dimensions and mobility make microbes challenging to analyse on-chip. A sub-micron resolution microfluidic system (sub-microfluidics) ...

Royal Soc Chemistry2013