Publications associées à Cercle de Mohr

Bounding the localized to ductile transition in porous rocks: implications for geo-reservoirs

Marie Estelle Solange Violay, Gabriel Gérard Dominique Meyer

Porous rocks have long been the focus of intense research driven by their importance in our society as host to our most essential resources (oil, gas, water, geothermal energy, etc), yet their rheology remains poorly understood. With increasing depth, poro ...

2023

Three-Dimensional Numerical Modelling of Al-Salam Storm Water Pumping Station in Saudi Arabia

Azin Amini, Azad Koliji

The Al-Salam Pump Station will be constructed in the framework of Jeddah Storm water Masterplan (JSWM) in Saudi Arabia. The station discharges the incoming flow from the Al-Salam storm tunnel to the Red Sea. Its structure includes a circular deep wet well ...

IAHR2022

Yielding of a quartz sand from saturated to dry state

Alessio Ferrari

The paper presents the results of an experimental work where we analyse the behaviour of an unsaturated quartz sand in a wide range of degree of saturation (from saturated to dry state). The possibility of anticipating the hydro-mechanical behaviour of the ...

E D P SCIENCES2020

Glenoid bone strain after anatomical total shoulder arthroplasty: In vitro measurements with micro-CT and digital volume correlation

Dominique Pioletti, Alexandre Terrier, Alain Farron, Yasmine Boulanaache

Glenoid implant loosening remains a major source of failure and concern after anatomical total shoulder arthroplasty (aTSA). It is assumed to be associated with eccentric loading and excessive bone strain, but direct measurement of bone strain after aTSA i ...

2020

Mechanical and hydraulic transport properties of transverse-isotropic Gneiss deformed under deep reservoir stress and pressure conditions

Marie Estelle Solange Violay, Mateo Alejandro Acosta

In central Europe, many geo-energy reservoirs have revealed to be hosted in transverse isotropic crystalline rock, where the rock's mechanical and hydraulic transport properties are poorly constrained. Here, we performed triaxial experiments on Cresciano G ...

2020

Experimental push-out investigation on the in-plane force-deformation behavior of integrally-attached timber Through-Tenon joints

Yves Weinand, Aryan Rezaei Rad, Henry V. Burton

Spurred by developments in digital fabrication, there has been an increase in the application of the Integral Mechanical Attachment (IMA) technique in timber plate structures. Despite its increase in popularity, there have been very few systematic investig ...

2019

Reservoir stimulation’s effect on depletion-induced seismicity

Lyesse Laloui, Barnaby Padraig Fryer, Gunter Siddiqi

Depletion-induced seismicity can pose a problem in some fluid-producing subsurface reservoirs, in some cases requiring production rate control in order to limit the seismicity. This study investigates the use of reservoir stimulation to reduce the depletio ...

2018

The role of the stress regime on microseismicity induced by overpressure and cooling in geologic carbon storage

Victor Vilarrasa Riano

Fluid injection in deep geological formations usually induces microseismicity. In particular, industrial-scale injection of CO2 may induce a large number of microseismic events. Since CO2 is likely to reach the storage formation at a lower temperature than ...

Wiley-Blackwell2016

Paul-Mohr-Coulomb failure surface of rock in the brittle regime

Roman Makhnenko

The Paul-Mohr-Coulomb failure criterion includes the intermediate principal stress sigma(II) and friction angles at the limiting stress states of sigma(II)= sigma(III) and sigma(II) = sigma(I), where sigma(I) and sigma(III) are major and minor principal st ...

Amer Geophysical Union2015

Force-based higher-order beam element with flexural–shear–torsional interaction in 3D frames. Part I: Theory

João Saraiva Esteves Pacheco de Almeida

An innovative higher-order beam theory, capable of accurately taking into account flexural–shear–torsional interaction, is originally combined with a force-based formulation to derive the corresponding finite element. The selected set of higher-order defor ...

Elsevier2015