In analytical chemistry, a rotating ring-disk electrode (RRDE) is a double working electrode used in hydrodynamic voltammetry, very similar to a rotating disk electrode (RDE). The electrode rotates during experiments inducing a flux of analyte to the electrode. This system used in electrochemical studies when investigating reaction mechanisms related to redox chemistry and other chemical phenomena. The difference between a rotating ring-disk electrode and a rotating disk electrode is the addition of a second working electrode in the form of a ring around the central disk of the first working electrode. To operate such an electrode, it is necessary to use a potentiostat, such as a bipotentiostat, capable of controlling a four-electrode system. The two electrodes are separated by a non-conductive barrier and connected to the potentiostat through different leads. This rotating hydrodynamic electrode motif can be extended to rotating double-ring electrodes, rotating double-ring-disk electrodes, and even more esoteric constructions, as suited to the experiment. The RRDE takes advantage of the laminar flow created during rotation. As the system is rotated, the solution in contact with the electrode is driven to its side, similar to the situation of a rotating disk electrode. As the solution flows to the side, it crosses the ring electrode and flows back into the bulk solution. If the flow in the solution is laminar, the solution is brought in contact with the disk and with the ring quickly afterward, in a very controlled manner. The resulting currents depend on the potential, area, and spacing of the electrodes, as well as the rotation speed and the substrate. This design makes a variety of experiments possible, for example a complex could be oxidized at the disk and then reduced back to the starting material at the ring. It is easy to predict what the ring/disk current ratios is if this process is entirely controlled by the flow of solution. If it is not controlled by the flow of the solution the current will deviate.

À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
Proximité ontologique
Cours associés (7)
EE-519: Bioelectronics and biomedical microelectronics
The course covers the fundaments of bioelectronics and integrated microelectronics for biomedical and implantable systems. Issues and trade-offs at the circuit and systems levels of invasive microelec
ChE-407: Electrochemical engineering
This course builds upon the underlying theory in thermodynamics, reaction kinetics, and transport and applies these methods to electrosynthesis, fuel cell, and battery applications. Special focus is p
NX-422: Neural interfaces
Neural interfaces (NI) are bioelectronic systems that interface the nervous system to digital technologies. This course presents their main building blocks (transducers, instrumentation & communicatio
Afficher plus
Concepts associés (8)
Linear sweep voltammetry
In analytical chemistry, linear sweep voltammetry is a method of voltammetry where the current at a working electrode is measured while the potential between the working electrode and a reference electrode is swept linearly in time. Oxidation or reduction of species is registered as a peak or trough in the current signal at the potential at which the species begins to be oxidized or reduced. The experimental setup for linear sweep voltammetry utilizes a potentiostat and a three-electrode setup to deliver a potential to a solution and monitor its change in current.
Électrode à disque tournant
L'électrode à disque tournant ou EDT (Rotating Disk Electrode ou RDE en anglais) est une électrode de travail hydrodynamique utilisée dans une cellule à trois électrodes. Elles sont couramment utilisées pour des études de cinétique électrochimique en régime stationnaire. Cela vient du fait qu'il est possible, sous certaines hypothèses, de résoudre les équations de Navier-Stokes dans le cas d'une EDT, c’est-à-dire de connaître la vitesse et la direction du flux d'électrolyte au voisinage de l'EDT.
Potentiostat
Un potentiostat est un appareil électronique destiné à l'étude des phénomènes électrochimiques. La première méthode potentiostatique a été utilisée par Frederick Cottrell en 1903. Elle consistait en une cellule électrochimique connectée à une batterie en série avec un galvanomètre pour la mesure d'un courant, mais ce simple potentiostat n'était pas capable de mesurer la différence de potentiel à l'interface de l'électrode de travail dans le circuit.
Afficher plus

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.