Publications associées à Cellular confinement

A comprehensive review on geomembrane systems application in hydropower

Geomembrane systems have been used at hydropower plants as rehabilitation and mitigation technology for several decades and are now used worldwide. In the context of planning an energy transition that promotes the sustainable use of water resources for ene ...

2024

Dynamic behavior of exposed geomembrane systems in pressure waterways

Giovanni De Cesare, Samuel Luke Vorlet, Roberto Proença Seixas

Geomembrane systems have been used in dams and reservoirs as rehabilitation technology since several decades and are now used worldwide. They act as impervious layer to prevent and mitigate water leakage and damage to structures. They meet the needs of man ...

CRC Press/Balkema2023

Deformation capacity evaluation for flat slab seismic design

Aurelio Muttoni, Lorenzo Martinelli, António Manuel Pinho Ramos, Andri Setiawan

In flat-slab frames, which are typically designed as secondary seismic structures, the shear failure of the slab around the column (punching failure) is typically the governing failure mode which limits the deformation capacity and can potentially lead to ...

SPRINGER2022

A mechanical approach for the maximum punching resistance of shear-reinforced slab-column connections

Aurelio Muttoni, Miguel Fernández Ruiz, João Tiago Ramos Bernardo de Santa Rita Simões, Diego Hernández Fraile

The use of punching shear reinforcement is currently considered as one of the most convenient practices to enhance the punching shear strength and deformation capacity of slab-column connections in flat slabs. Intensive research has been performed in the l ...

Fédération Internationale du Béton (fib)2021

Design and temporal issues in Soil Bioengineering structures for the stabilisation of shallow soil movements

Giovanni De Cesare, Massimiliano Schwarz

In the last decades, soil bioengineering has gained considerable popularity worldwide, especially in hillslope, riverbank, and earth embankment stabilisation works. The use of plants as a building material transfers the plant multifunctionality within engi ...

2021

Combined Shear-Flexural Verification Of In Plane Loaded Reinforced And Unreinforced Masonry Walls

Lorenzo Benedetti

The safety verification of in-plane loaded masonry panels requires the evaluation of at least three different collapse conditions connected with overturning, shear sliding, and shear - compression failure at the panels' toe. In reinforced panels, the resis ...

INT CENTER NUMERICAL METHODS ENGINEERING2021

Geotechnical and environmental performance of retaining structures in unsaturated soils

Gianluca Speranza

Presently, environmental issues are considered as critical aspects concerning the market competitiveness in the building and construction sector. However, the construction sector is regarded as one of the main areas contributing to CO2 emissions and resour ...

EPFL2020

Enhancing Punching Strength and Deformation Capacity of Flat Slabs

Aurelio Muttoni, Miguel Fernández Ruiz, Raffaele Cantone

Punching reinforcement systems have significantly developed in recent years as they allow enhancing the punching resistance of slab-column connections as well as their deformation capacity. These systems, with varying geometry and layout, normally consist ...

2019

Static behavior of reinforced UHPFRC beams with minimal cover thickness

Eugen Brühwiler, Bartlomiej Wojciech Sawicki

Because of its high tensile strength and deformation capacity, UHPFRC (Ultra High Performance Fiber Reinforced Cementitious composite) can theoretically be used without any reinforcement bars or prestressing. However, for more economical design and for rea ...

2019

Static behavior of Reinforced UHPFRC beams with thin cover depth

Eugen Brühwiler, Bartlomiej Wojciech Sawicki

Because of its high tensile strength and deformation capacity, UHPFRC (Ultra High Performance Fiber Reinforced Cementitious composite) can theoretically be used without any reinforcement bars or prestressing. However, for more economical design and for rea ...

2019