Publications associées à DFX

Experimental characterization and stochastic models for time-dependent rupture of thin-ply composite laminates

Thin-laminate composites with thicknesses below 200 mu m hold significant promise for future, larger, and lighter deployable structures. This paper presents a study of the time-dependent failure behavior of thin carbon-fiber laminates under bending, focusi ...

2024

A Conceptual Framework for Integrating Conversational Agents in Digital Education

Juan Carlos Farah

The presence of conversational agents (or chatbots) in educational contexts has been steadily increasing over the past few years. Recent surveys have shown widespread interest in the use of chatbots in education, both for research and practice. Although th ...

EPFL2023

Dielectrophoretic Traps for Efficient Bead and Cell Trapping and Formation of Aggregates of Controlled Size and Composition

Philippe Renaud, Arnaud Bertsch, Clémentine Sophie Sarah Lipp

We present a microfluidic dielectrophoretic-actuated system designed to trap chosen single-cell and form controlled cell aggregates. A novel method is proposed to characterize the efficiency of the dielectrophoretic trapping, considering the flow speed but ...

2022

Bias free multiobjective active learning for materials design and discovery

Berend Smit, Kevin Maik Jablonka, Shi-Lin Wang

The design rules for materials are clear for applications with a single objective. For most applications, however, there are often multiple, sometimes competing objectives where there is no single best material and the design rules change to finding the se ...

Nature Research2021

A generic methodology and a digital twin for zero defect manufacturing (ZDM) performance mapping towards design for ZDM

Foivos Psarommatis Giannakopoulos

Over recent years, the manufacturing industry has seen constant growth and change. From one side, it has been affected by the fourth industrial revolution (Industry 4.0). From the other side, it has had to enhance its ability to meet higher customer expect ...

2021

On the Application of Small-Scale Turbines in Industrial Steam Networks

François Maréchal, Jürg Alexander Schiffmann, Ivan Daniel Kantor, Ansgar Weickgenannt

This study investigates the technical and economic feasibility of replacing throttling valves with smale-scale, oil-free turbomachinery in industrial steam networks. This is done from the perspective of the turbomachine, which has to be integrated into a n ...

2021

Unstable tilting motion of flexibly supported gas bearing bushings

Jürg Alexander Schiffmann, Philipp Kaspar Bättig

This paper presents measurements of the motion amplitudes from flexibly supported Herringbone Grooved Journal Bearing bushings. Measurements taken in four locations on the flexibly supported bearing bushing enable the distinction between the radial and the ...

2022

Design guidelines for Al-12%Si latent heat storage encapsulations to optimize performance and mitigate degradation

Sophia Haussener, Selmar Rudolf Binder

We provide detailed insight into the growth kinetics of intermetallic layers formed at the interface of molten Al-12%Si with cylindrical encapsulations of 316L stainless steel. This knowledge is relevant for the design and operation of high-temperature lat ...

ELSEVIER2020

Influence of Large Relative Tip Clearances for a Micro Radial Fan and Design Guidelines for Increased Efficiency

Jan Van Herle, Jürg Alexander Schiffmann, Patrick Hubert Wagner

The blade tip clearance loss was studied experimentally and numerically for a micro radial fan with a tip diameter of 19:2mm. Its relative blade tip clearance, i.e., the clearance dividedby the blade height of 1:82mm, was adjusted with different shims. The ...

2021

Toward ultra-low power design methodology for frequency generation in the IoT design space

Mathieu Yves Hervé Coustans

Today, the semiconductor industry is feeding our digital world with more and more data coming from compact embedded electronics that are monitoring our environment and feeding analytics for action. Interaction with our digital world is mostly achieved thro ...

EPFL2019