Potential | EPFL Graph Search

Potential generally refers to a currently unrealized ability. The term is used in a wide variety of fields, from physics to the social sciences to indicate things that are in a state where they are able to change in ways ranging from the simple release of energy by objects to the realization of abilities in people. The philosopher Aristotle incorporated this concept into his theory of potentiality and actuality, a pair of closely connected principles which he used to analyze motion, causality, ethics, and physiology in his Physics, Metaphysics, Nicomachean Ethics, and De Anima, which is about the human psyche. That which is potential can theoretically be made actual by taking the right action; for example, a boulder on the edge of a cliff has potential to fall that could be actualized by pushing it over the edge. Several languages have a potential mood, a grammatical construction that indicates that something is potential. These include Finnish, Japanese, and Sanskrit. In physics, a p

Determining The Potential Of Salinity Gradient Energy Source Using An Exergy Analysis

Arash Emdadi

Mixing of fresh (river) water and salty water (seawater or saline brine) in a control fashion would produces an electrical energy known as salinity gradient energy (SGE). Two main conversion technologies of SGE are membrane-based processes; pressure retarded osmosis (PRO) and reverse electrodialysis (RED). In PRO, semipermeable membranes placed between the two streams of solutions allow the transport of water from low-pressure diluted solution to high-pressure concentrated solution. RED requires two alternating semipermeable membranes that allow the diffusion of the ions but not the flow of H2O. Lifetime and power density of the semipermeable membrane are two main factors affecting on deployment of PRO and RED. Semipermeable membranes with lifetime greater than 10 years and power density higher than 5 W/m(2) would lead to faster development of this conversion technology. An exergy analysis of an SGE system of sea-river can be applied to calculate the maximum potential power for electricity generation. Seawater is taken as reference environment (global dead state) for calculating the exergy of water since the seawater is the final reservoir. Once the fresh water is mixed with water of the sea or lake it becomes unuseful for human, agricultural or industrial uses loses all its exergy. Aqueous sodium chloride solution model is used in this study to calculate the thermodynamic properties of seawater. This model does not consider seawater as an ideal model and provides accurate thermodynamics properties of sodium chloride solution. As a case study, exergy calculation of Iran's Urmia Lake- GadarChay River system. The chemical exergy analysis considers sodium chloride (NaCl) as main salt in the water of Lake Urmia. The sodium chloride concentration is more than 200 g/L in recent years. Based on the exergy results the potential power of this system is 329 MW. This results indicates a high potential for constructing power plant for salinity gradient energy conversion.

Amer Soc Mechanical Engineers2016

Accurate Profile Measurement of the low Intensity Secondary Beams in the CERN Experimental Areas

Inaki Ortega Ruiz

The CERN accelerators deliver a wide spectrum of secondary beams to the Experimental Areas. These beams are composed of hadrons, leptons, and heavy ions that can vary greatly in momentum (1 GeV/c to 400 GeV/c) and intensity (10^2 to 10^8 particles per second). The profile, position, and intensity of these beams are measured utilising particle detectors. However, the current systems show several problems that limit the quality of this kind of monitoring. The aim of this doctoral thesis is to investigate the best detector technology that could replace the existing monitors and build a first prototype of it. A review of the existing detection techniques has led to the choice of Scintillating Fibres (SciFi) read-out with Silicon Photomultipliers (SiPM). This detection technology has the potential to perform better in terms of material budget, range of intensities measured, and active area size. In addition, it has particle counting capabilities, which could extend its application to momentum spectrometry or Time-of-Flight (ToF) measurements. Its resistance to radiation damage offers good potential for longevity of use. A first prototype of a SciFi-SiPM monitor has been successfully tested with different particle beams at CERN, giving accurate profile measurements over a wide range of energies and intensities. It has only shown problems during use with lead ion beams, whose origin is believed to be crosstalk between the fibres. A Geant4 simulation of a single scintillating fibre has been performed to estimate its signal generation. This simulation is verified by real measurements of the light yield of scintillating fibres. Similarly, another Geant4 simulation of a full SciFi monitor has been developed to characterise the perturbation of the beam by the monitor. The future beam instrumentation for the Neutrino Platform at CERN is also described here, which is being developed as a continuation of the work conducted during this thesis.

EPFL2018

A Review of Grooved Dynamic Gas Bearings

Lili Gu, Eliott Philippe Guenat, Jürg Alexander Schiffmann

This paper offers an extensive review of publications dealing with the modeling, the design and the experimental investigation of grooved dynamic gas lubricated bearings. Recent years have witnessed a rise in small-scale and high-speed turbomachinery applications. Besides the well-known gas foil bearings, grooved bearings offer attractive advantages, which unveil their potential in particular at small scale due to the structural simplicity as well as satisfying predictability. This paper starts with a general background of the application of gas lubricated bearings and introduces and compares the different gas bearing topologies. Further, the state-of-the-art modeling of grooved gas lubricated bearings is introduced in a systematic way assessing the advantages and inconveniences of two major approaches, the Narrow Groove Theory (NGT) and direct discretization method. Since NGT method is an elegant and efficient approach to model the complex effects of periodic grooves, a critical section is dedicated to the Narrow Groove Theory. In a second phase different models to include additional physical phenomena such as real gas lubrication, rarefaction or turbulence effects are reviewed. The paper concludes with a critical assessment of the state-of-the-art and indicates potential fields of research that would allow to shed more light into the understanding of these bearings, as well as with some thoughts on the integrated design methodologies of gas bearing supported rotors.

2020