Publications associées à Studio transmitter link

Theoretical Efficiency and Dosimetry of Buffered On-body Transmitter Antennas for Wireless Powering of In-body Devices

The viable and safe application of wireless power transfer for powering bioelectronic implants requires understanding the wave propagation in heterogeneous and dispersive media, the electromagnetic exposure assessment, and the optimum design of the system ...

IEEE2022

Inductive Power Transfer System for Auxiliary Power Supply in Medium Voltage Converters

Drazen Dujic, Chengmin Li, Xiaotong Du

Inductive power transfer technology is an attractive solution for medium voltage applications by eliminating the need for high voltage cables or wired connections in general. This paper introduces an inductive power transfer system which has multiple indep ...

2022

A 100 kb/s, 4 GHz, 267 mu W Fully Integrated Low Power FM-UWB Transceiver with Multiple Channels

Christian Enz, Vladimir Kopta

A 4 GHz, 100 kb/s FM-UWB transceiver for short-range communications in a body area network is presented. Two receivers and a transmitter use the same RF port with a fully-integrated matching network. The first receiver provides multi-user communication cap ...

IEEE2018

Area and Power Efficient Ultra-Wideband Transmitter Based on Active Inductor

Catherine Dehollain, Kerim Türe, Arnout Jan J Devos, Franco Maloberti

This paper presents the design of an impulse radio ultra-wideband (IR-UWB) transmitter for low-power, short-range, and high-data rate applications such as high density neural recording interfaces. The IR-UWB transmitter pulses are generated by modulating t ...

2018

Optimization of the Data Rate of an OOK CMOS Medical Transmitter Based on LC Oscillators

Catherine Dehollain, Kerim Türe, Gürkan Yilmaz, Franco Maloberti

This paper presents techniques for increasing communication data rates for OOK modulated signals in the case the carrier frequency is generated by a cross-coupled pair LC oscillator. The proposed circuitry completely turns off the transmitter during the tr ...

Ieee2016

A 2.4-GHz low complexity polar transmitter using dynamic biasing for IEEE 802.15.6

Christian Enz, Vladimir Kopta, Raghavasimhan Thirunarayanan, Franz Xaver Pengg

A 2.4 GHz polar transmitter compliant with the IEEE 802.15.6 standard is presented in this paper. A Linearized class-C power amplifier, employing dynamic biasing is used to minimize the adjacent channel interference and satisfy the defined spectrum mask re ...

IEEE2015

A System for Wireless Power Transfer and Data Communication of Long-Term Bio-Monitoring

Giovanni De Micheli, Sandro Carrara, Catherine Dehollain, Francesca Stradolini, Cristina Boero, Camilla Baj-Rossi, Seyedeh Sara Ghoreishizadeh, Stefano Riario, Enver Gürhan Kilinç, Franco Maloberti

A system for wireless power transfer and data communication of implantable bio-monitoring systems is presented. The proposed solution uses a servo-controlled power transmitter moved under the animal moving space. An x-y movable magnetic coil transmits the ...

Institute of Electrical and Electronics Engineers2015

Calibration method and system

Martin Vetterli, Ivan Dokmanic

The present invention concerns a method for calibrating an array of receivers (ri), each receiver being configured for receiving a signal transmitted by at least one transmitter (si), and echoes of the transmitted signal as reflected by one or more reflect ...

2014

A 2.4-GHz low power polar transmitter for wireless body area network applications

Christian Enz, Vladimir Kopta, Franz Xaver Pengg

A 2.4-GHz low power polar transmitter architecture is proposed in this paper. A dynamic biasing circuit, controlled by a digital envelope signal, is used to linearize the input-output characteristic of the overdriven class-C power amplifier. A model of the ...

2013

Full-duplex Communication and Remote Powering Implementation of an Electronic Knee Implant

Catherine Dehollain, Oguz Atasoy

Full-duplex communication is realized by using ASK modulation for downlink (the channel from controller to the implant) and by using FSK modulation for uplink (from implant to the controller). The ASK modulation is done at the remote powering frequency and ...

Ieee2013