Publications associées à Differential amplifier

An Ultralow-Power Triaxial MEMS Accelerometer With High-Voltage Biasing and Electrostatic Mismatch Compensation

This article presents a triaxial micro electromechani-cal system (MEMS) capacitive accelerometer using a high-voltage biasing technique to achieve high resolution with ultralow power. The accelerometer system generates a differential pair of high voltages ...

Ieee-Inst Electrical Electronics Engineers Inc2024

A Two-Wired High Input Impedance and High CMRR Active Electrode Insensitive to Component Mismatch

Alexandre Schmid, Mehdi Saberi

This article proposes a new two-wired amplifying active electrode (AE), presenting a high input impedance and a high common-mode rejection ratio (CMRR). In the proposed structure, the input impedance and the CMRR of the system are considerably increased by ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Integrated Electronics for Deep Implants to Remotely Monitor Hemodynamics

Mustafa Besirli

The integration of technology in the medical field has greatly improved accuracy in diagnoses, thus leading to more effective treatments. Wearable and implantable medical devices offer great potential for remote patient monitoring, particularly for heart f ...

EPFL2023

A Delta Sigma-Modulated Sample and Average Common-Mode Feedback Technique for Capacitively Coupled Amplifiers in a 192-nW Acoustic Analog Front-End

Kyojin Choo

This work presents an acoustic analog front-end based on a delta sigma-modulated sample and average common-mode feedback technique. The proposed feedback offers a process and temperature stable high pass (HP) frequency corner, unity dc feedback gain, and a ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

A Capacitively-Coupled Chopper Instrumentation Amplifier for Implantable Bridge Sensor Systems

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Kerim Türe, Mustafa Besirli

This paper presents an energy and area efficient capacitively-coupled chopper instrumentation amplifier (CCIA) dedicated to implantable bridge sensor systems. Chopper stabilization is employed to decrease its offset and 1/f noise and the resulting ripple d ...

IEEE2022

An Energy-Efficient Bridge-to-Digital Converter for Implantable Pressure Monitoring Systems

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Kerim Türe, Mustafa Besirli, Franco Maloberti

This paper presents an energy-efficient, duty-cycled, and spinning excitation bridge-to-digital converter (BDC) designed for implantable pressure sensing systems. The circuit provides the measure of the pulmonary artery pressure that is particularly releva ...

2022

Negative Capacitance in HfO2 Gate Stack Structures With and Without Metal Interlayer

Mihai Adrian Ionescu, Igor Stolichnov, Ali Saeidi, Eamon Patrick O'Connor, Francesco Bellando, Matteo Cavalieri, Carlotta Gastaldi

In this work, we experimentally explore and compare FET gate stacks with and without an inner metal plane between a linear dielectric (SiO2) and a ferroelectric layer (Si-doped HfO2) operating in the negative capacitance (NC) regime. The use of nanosecond- ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Medipix4, a high granularity four sides buttable pixel readout chip for high resolution spectroscopic X-ray imaging at rates compatible with medical CT scans

Viros Sriskaran

Medipix4 is the latest member in the Medipix/Timepix family of pixel detector chips aimed at high rate spectroscopic X-ray imaging using high-Z materials. The chip address the limitations of conventional hybrid pixel detectors for X-ray imaging. Its predec ...

EPFL2022

Lock-in amplified differential phase contrast

Christophe Moser, Timothé Laforest, Damien Claude-Marie Loterie, Chiara Bonati

We introduce a lock-in method to increase the phase contrast in incoherent Differential Phase Contrast (DPC) imaging. The use of a smart pixel detector with in-pixel signal demodulation, paired with synchronized illumination, provides the basis of a bit-ef ...

SPIE-INT SOC OPTICAL ENGINEERING2022

An 8-Bit 800 MS/s Loop-Unrolled SAR ADC With Common-Mode Adaptive Background Offset Calibration in 28 nm FDSOI

Yusuf Leblebici, Firat Çelik, Ayça Akkaya

This paper presents a low-power single-channel 8-bit loop-unrolled (LU) successive approximation register (SAR) analog-to-digital-converter (ADC) with a novel common-mode adaptive background comparator offset calibration scheme. LU-SAR ADCs use multiple co ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021