Publications related to Differential amplifier

An Ultralow-Power Triaxial MEMS Accelerometer With High-Voltage Biasing and Electrostatic Mismatch Compensation

This article presents a triaxial micro electromechani-cal system (MEMS) capacitive accelerometer using a high-voltage biasing technique to achieve high resolution with ultralow power. The accelerometer system generates a differential pair of high voltages ...

Piscataway2024

A Two-Wired High Input Impedance and High CMRR Active Electrode Insensitive to Component Mismatch

Alexandre Schmid, Mehdi Saberi

This article proposes a new two-wired amplifying active electrode (AE), presenting a high input impedance and a high common-mode rejection ratio (CMRR). In the proposed structure, the input impedance and the CMRR of the system are considerably increased by ...

Piscataway2024

A Delta Sigma-Modulated Sample and Average Common-Mode Feedback Technique for Capacitively Coupled Amplifiers in a 192-nW Acoustic Analog Front-End

Kyojin Choo

This work presents an acoustic analog front-end based on a delta sigma-modulated sample and average common-mode feedback technique. The proposed feedback offers a process and temperature stable high pass (HP) frequency corner, unity dc feedback gain, and a ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

A Capacitively-Coupled Chopper Instrumentation Amplifier for Implantable Bridge Sensor Systems

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Kerim Türe, Mustafa Besirli

This paper presents an energy and area efficient capacitively-coupled chopper instrumentation amplifier (CCIA) dedicated to implantable bridge sensor systems. Chopper stabilization is employed to decrease its offset and 1/f noise and the resulting ripple d ...

IEEE2022

An Energy-Efficient Bridge-to-Digital Converter for Implantable Pressure Monitoring Systems

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Kerim Türe, Mustafa Besirli, Franco Maloberti

This paper presents an energy-efficient, duty-cycled, and spinning excitation bridge-to-digital converter (BDC) designed for implantable pressure sensing systems. The circuit provides the measure of the pulmonary artery pressure that is particularly releva ...

2022

Negative Capacitance in HfO2 Gate Stack Structures With and Without Metal Interlayer

Mihai Adrian Ionescu, Igor Stolichnov, Ali Saeidi, Eamon Patrick O'Connor, Francesco Bellando, Matteo Cavalieri, Carlotta Gastaldi

In this work, we experimentally explore and compare FET gate stacks with and without an inner metal plane between a linear dielectric (SiO2) and a ferroelectric layer (Si-doped HfO2) operating in the negative capacitance (NC) regime. The use of nanosecond- ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Lock-in amplified differential phase contrast

Christophe Moser, Timothé Laforest, Damien Claude-Marie Loterie, Chiara Bonati

We introduce a lock-in method to increase the phase contrast in incoherent Differential Phase Contrast (DPC) imaging. The use of a smart pixel detector with in-pixel signal demodulation, paired with synchronized illumination, provides the basis of a bit-ef ...

SPIE-INT SOC OPTICAL ENGINEERING2022

An 8-Bit 800 MS/s Loop-Unrolled SAR ADC With Common-Mode Adaptive Background Offset Calibration in 28 nm FDSOI

Yusuf Leblebici, Firat Çelik, Ayça Akkaya

This paper presents a low-power single-channel 8-bit loop-unrolled (LU) successive approximation register (SAR) analog-to-digital-converter (ADC) with a novel common-mode adaptive background comparator offset calibration scheme. LU-SAR ADCs use multiple co ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

A 0.4 nJ Excitation Energy Bridge-to-Digital Converter for Implantable Pulmonary Artery Pressure Monitoring

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Kerim Türe, Mustafa Besirli

This paper presents an energy-efficient, duty-cycled, and spinning excitation bridge-to-digital converter (BDC) suitable for measuring the pulmonary artery pressure of heart failure patients with an implantable system. The duty-cycled bridge uses resistanc ...

IEEE2021

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Differential amplifier

An Ultralow-Power Triaxial MEMS Accelerometer With High-Voltage Biasing and Electrostatic Mismatch Compensation

A Two-Wired High Input Impedance and High CMRR Active Electrode Insensitive to Component Mismatch

Advances in High-Speed, Multiparametric Atomic Force Microscopy

A Delta Sigma-Modulated Sample and Average Common-Mode Feedback Technique for Capacitively Coupled Amplifiers in a 192-nW Acoustic Analog Front-End

A Capacitively-Coupled Chopper Instrumentation Amplifier for Implantable Bridge Sensor Systems

An Energy-Efficient Bridge-to-Digital Converter for Implantable Pressure Monitoring Systems

Negative Capacitance in HfO2 Gate Stack Structures With and Without Metal Interlayer

Lock-in amplified differential phase contrast

An 8-Bit 800 MS/s Loop-Unrolled SAR ADC With Common-Mode Adaptive Background Offset Calibration in 28 nm FDSOI

A 0.4 nJ Excitation Energy Bridge-to-Digital Converter for Implantable Pulmonary Artery Pressure Monitoring

Graph Chatbot

Chat with Graph Search

An Ultralow-Power Triaxial MEMS Accelerometer With High-Voltage Biasing and Electrostatic Mismatch Compensation

Advances in High-Speed, Multiparametric Atomic Force Microscopy

An Energy-Efficient Bridge-to-Digital Converter for Implantable Pressure Monitoring Systems

A Capacitively-Coupled Chopper Instrumentation Amplifier for Implantable Bridge Sensor Systems

A Two-Wired High Input Impedance and High CMRR Active Electrode Insensitive to Component Mismatch

A 0.4 nJ Excitation Energy Bridge-to-Digital Converter for Implantable Pulmonary Artery Pressure Monitoring

A Delta Sigma-Modulated Sample and Average Common-Mode Feedback Technique for Capacitively Coupled Amplifiers in a 192-nW Acoustic Analog Front-End

An 8-Bit 800 MS/s Loop-Unrolled SAR ADC With Common-Mode Adaptive Background Offset Calibration in 28 nm FDSOI

Negative Capacitance in HfO2 Gate Stack Structures With and Without Metal Interlayer

Lock-in amplified differential phase contrast