Tacheometry (ˌtækiˈɒmᵻtri; from Greek for "quick measure") is a system of rapid surveying, by which the horizontal and vertical positions of points on the earth's surface relative to one another are determined without using a chain or tape, or a separate levelling instrument.
Instead of the pole normally employed to mark a point, a staff similar to a level staff is used. This is marked with heights from the base or foot, and is graduated according to the form of tacheometer in use.
The horizontal distance S is inferred from the vertical angle subtended between two well-defined points on the staff and the known distance 2L between them. Alternatively, also by readings of the staff indicated by two fixed stadia wires in the diaphragm (reticle) of the telescope. The difference of height Δh is computed from the angle of depression z or angle of elevation α of a fixed point on the staff and the horizontal distance S already obtained.
The azimuth angle is determined as normally. Thus, all the measurements requisite to locate a point both vertically and horizontally with reference to the point where the tacheometer is centred are determined by an observer at the instrument without any assistance beyond that of a person to hold the level staff.
The ordinary methods of surveying with a theodolite, chain, and levelling instrument are fairly satisfactory when the ground is relatively clear of obstructions and not very precipitous, but it becomes extremely cumbersome when the ground is covered with bush, or broken up by ravines. Chain measurements then become slow and liable to considerable error; the levelling, too, is carried on at great disadvantage in point of speed, though without serious loss of accuracy. These difficulties led to the introduction of tacheometry.
In western countries, tacheometry is primarily of historical interest in surveying, as professional measurement nowadays is usually carried out using total stations and recorded using data collectors. Location positions are also determined using GNSS.
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
Length measurement, distance measurement, or range measurement (ranging) refers to the many ways in which length, distance, or range can be measured. The most commonly used approaches are the rulers, followed by transit-time methods and the interferometer methods based upon the speed of light. For objects such as crystals and diffraction gratings, diffraction is used with X-rays and electron beams. Measurement techniques for three-dimensional structures very small in every dimension use specialized instruments such as ion microscopy coupled with intensive computer modeling.
Le tachéomètre est un appareil servant à mesurer les angles horizontaux et verticaux entre deux cibles, ainsi que la distance entre ces cibles. Les mesures prises permettent de caractériser un triangle géodésique, et donc soit d'établir une carte ou un plan, soit de vérifier la cohérence entre un plan et la réalité du terrain. Un théodolite couplé avec un fil stadimétrique est le type le plus simple de tachéomètre (tachéomètre Moinot).
thumb|Un théodolite Un théodolite est un instrument d'optique, mesurant des angles dans les deux plans horizontaux et verticaux . Il est utilisé pour réaliser les mesures d’une triangulation, c'est-à-dire des angles d’un triangle. C'est un instrument essentiel en géodésie, cartographie, topographie, en ingénierie et en archéologie. Les géomètres en font leur principal instrument de terrain. Un théodolite a d’abord désigné un instrument d’arpentage (1704).
The height and/or deformation of a surface of an object (10) defined in terms of x, y and z coordinates is measured by projecting a divergent beam of light 21) onto the surface to produce a periodic pattern of fringes (30. A CCD camera (40) views the surfa ...
Electric field distributions within lightning protection volume of a single lightning rod are studied for the case of a vertical downward leader. The boundaries of volumes with the electrical strength exceeding its critical value for ionization in air are ...
Gas lubricated Herringbone-Grooved Journal Bearings (HGJB) are a promising solution to support high-speed rotors in oil-free turbo-machinery due to their compactness, relatively low losses, no need for lubrication and low wear.
Gas lubricated bearings, how ...