Robot parallèle | EPFL Graph Search

Un robot parallèle est un mécanisme dont l'architecture lui confère des propriétés remarquables. La définition scientifique est : En quelque sorte, l'organe terminal ou effecteur — partie qui agit sur l'environnement, outil — est relié au bâti par plusieurs bras, chaque bras étant une « chaîne cinématique » (association de plusieurs pièces articulées entre elles). Sa mobilité est donc restreinte, puisqu'elle est limitée par les divers bras ; par contre, cela confère une plus grande résistance et précision, puisque les efforts sont répartis. Le plus répandu parmi les mécanismes parallèles est connu sous des dénominations comme « hexapode », « plate-forme de Gough-Stewart », « plateforme synergistique ». Il peut se présenter sous différentes formes mais comporte en général 6 actionneurs identiques dont le couplage assure les qualités du système : 6 degrés de liberté dans les déplacements c’est-à-dire x, y, z, tangage, lacet et roulis. Il existe toutefois des robots de ce type av

Model-based control of fast parallel robots

A global approach to the problem of model-based control of fast parallel robots is proposed in this work. Fundamental differences between the well-known serial arms and parallel manipulators are first explained. A formalism inspired from Denavit-Hartenberg's makes it possible to parametrize any parallel manipulator by handling it as two tree robots connected through six standard links. Then, it is shown that kinematics and dynamics modeling is greatly simplified when the robot's state is represented both by the variables associated to the actuated joints and the variables specifying the end-effector's position in operational space. The inverse dynamics model of any parallel manipulator can then be put under a standard form called "in the two spaces". A Newton-Euler based algorithm is proposed for the real-time computation of the model in the two spaces its complexity is shown not to be much larger than for serial arms. Through Lagrangian mechanics, the model in the two spaces allows analysis of the robot's dynamics properties, such as passivity. These properties are shown to be equivalent to those of serial arms, except that parallel robots offer good performances only in a restricted workspace in which their Jacobian matrix remains bounded. Various control strategies for the trajectory tracking problem for fast robots are then examined. The advantages of model-based approaches combined with robust feedback laws in operational space are described. It is shown that a control loop in operational space requires less computations than in joint space for a parallel robot. Moreover, such a scheme can be very efficiently be implemented on a multiprocessor control unit that exploits the intrinsically parallel and pipeline structure of the required algorithms. Finally, the proposed approach is applied to the Delta parallel manipulator. A systematic approach leads to the kinematics and dynamics models of this robot, which are expressed under a very compact form. The analysis of the Delta's Jacobian matrix as well as some simulation results reveal the advantages and weak points of this manipulator. The implementation of a model-based control law for the Delta on a control unit with four Transputers is described. Some results obtained on a Delta with a crank belt reduction are presented and discussed.

EPFL1994

Improving the accuracy of parallel robots

The main objective of this thesis is the accuracy improvement of parallel robots. Accuracy can be improved either by precise manufacturing and assembly or by calibration of each individual robot using a kinematic model which takes geometric deviations into account. The latter has the advantage of leading to low cost solutions but requires sophisticated modeling of the robot's structure which is usually considerably more complex than the derivation of its nominal model. To substantiate the theoretical tools proposed in this thesis two examples of parallel structures are chosen. One of them is the Delta robot with three translational degrees of freedom whereas the second example is a novel structure called Argos having three rotational degrees of freedom. For experimental verification a mock-up was built for each of the two structures. Four calibration steps, modeling, measurement, identification, and implementation are investigated. Investigations were restricted to static errors due to geometric deviations assuming rigid bodies. First a formula is proposed which allows to calculate the number of independent kinematic parameters required for a complete model of a parallel structure. Then a systematic parameterization is introduced and applied to derive four calibration models, two for each example. Two measurement devices are described which were built to determine the position and orientation (pose) of the end-effectors of the two robots. For the Delta robot two additional set-ups using no external (additional) measurement device are proposed. For parameter identification different methods were tested by simulation. Calibration based on the implicit model is proposed as a standard method to calibrate parallel robots. Another calibration method is introduced, referred to as semiparametric calibration, which leads to low computational effort. Fast solutions of the direct and inverse problems had to be found. For the first time al1 the solutions of the direct problem for the Delta robot were found by means of an algorithm introduced by Husty. In addition a fast numeric algorithm for the Delta's direct problem is proposed. The main contribution of this thesis is the experimental verification of calibration methods to improve the accuracy of parallel robots. Using these calibration methods for the two robots, ARGOS and DELTA, between a three- to a twelve-fold improvement of accuracy was achieved and experimentally verified.

EPFL1996

Conception de robots de très haute précision à articulation flexibles

Jean-Philippe Bacher

High precision positionning and assembly as well as micro-machining require dedicated devices. These devices have to provide high repeatability and precision on several degrees of freedom (dof). High dynamic characteristics are also sought to reach short task execution time and a good robustness. This work shows how to design parallel robots with flexure joints that allow nanometric positionning repeatability and high dynamics. After a description of the state of the art, a design methodology is proposed. The state of the art is focused on several topics (analyses and design of flexure joints, parallel micro-robots, dynamic and control of high precision dynamic devices). The methodology guides the engineer through the different design-steps. The design of elementary flexures is studied and the concept of functionaly equivalent flexures is given. This concept consists in a comparison criterion for elementary flexures. The idea is to compare elements that allow a given displacement (for instance a bending angle) at maximal stress. The caracteristics of flexure joints are described. Stiffness and compliance matrix, accurary, eigen-frequencies and eigen-modes determine the behaviour of a joint. The flexure profile, mass-geometry and material choices are analysed. The links between a structure, its dynamic model and the controller are investigated. Several examples are proposed to assess the effect of the mechanical properties of the chosen structures. Two devices have been built to emphasize important issues encountered in the design and control of high precision flexure robots. The first one is a linear stage that highlights the importance of identification, sensitivities, algorithms, quantifications (control and mesure) and sampling on a single dof structure. The second one is a 3 dof parallel robot used as a micro electro-discharge machine. The properties and caracteristics of this robot are illustrated. Some questions like the calibration or the choice of the kinematics are still open.

EPFL2003