Publications associées à Perçage

Rising from rubble - Leveraging existing construction tools for upcycling concrete waste into slender walls

Katrin Beyer, Corentin Jean Dominique Fivet, Stefana Parascho, Qianqing Wang, Maxence Grangeot

In this paper, we present a new method for upcycling concrete rubble waste into slender walls through the lightweight digital augmentation of mainstream construction machines. By using such method, the environmental impact of concrete construction and demo ...

Springer2024

Testing of a full-scale flat slab building for gravity and lateral loads

Aurelio Muttoni, António Manuel Pinho Ramos

Full-scale testing of a two-storey flat slab structure is reported, undertaken in the SlabSTRESS research project; the construction and testing were planned and carried out at the ELSA laboratory of the European Commission's Joint Research Centre. The dime ...

ELSEVIER SCI LTD2021

Predrilled locking compression plate is more accurate than tension band wiring in restoring articular geometry of the ulnar greater sigmoid notch after olecranon Chevron osteotomy

Alexandre Terrier, Patrick Goetti, Frédéric Vauclair

Introduction: The olecranon Chevron osteotomy (OCO) is commonly used to approach complex intraarticular fractures of the distal humerus. Predrilled tension band wiring (TBW) has historically been used to fix OCO. However, clinical outcomes are burdened by ...

ELSEVIER SCI LTD2020

Fiber Bragg grating-based thermometer for drill bit temperature monitoring

Luc Thévenaz, Kenny Hey Tow

The temperature measurement of a drill bit during an implantology drilling process is proposed by using a fiber Bragg grating fitted inside the drill bit. Due to the rotational nature of the drilling process, a free-space fiber-optic rotary joint is used f ...

2019

Development of a novel mechanical micro-engraving method for the high-aspect-ratio microstructures of an advanced window system

André Gabriel Kostro, Josef Andreas Schuler, Jing Gong, Antoine Robert Michel Delaunay

A transparent polymer film with embedded micro mirrors is developed, and it can be attached to a window glass pane for daylighting, improving visual comfort and reducing cooling load in buildings by redirecting sunlight. Despite existing cutting-edge techn ...

2018

Compact fibre Bragg grating-based thermometer for on-line temperature monitoring of drill bits

Luc Thévenaz, Kenny Hey Tow

In this communication, a novel compact fibre Bragg grating-based thermometer for on-line temperature monitoring of drill bits is reported. Our proposed technique can potentially be used to optimize any drilling process, requiring the use of small drill bit ...

SPIE2016

Delamination monitoring using low frequency stress waves for laminated composites

Wei Shi, Zhisheng Yang, Pingyu Zhu

Owing to the anisotropy of composite laminates, local responses happens at periphery of the drilled hole even under the same loads. The strain measurement is probably the most sensitive and better option to detect and quantify delamination inside composite ...

Politecnico di Milano2016

High performance dye-sensitized solar cells with inkjet printed ionic-liquid electrolyte

Michael Graetzel, Shaik Mohammed Zakeeruddin, Syed Ghufran Hashmi

We successfully inkjet printed an ionic liquid electrolyte in the dye-sensitized solar cell (DSSC) as a part of a new cell fabrication sequence that eliminates drilling holes in the DSSC substrates. The inkjet printing of ionic liquid electrolyte does not ...

Elsevier Science Bv2015

Cutting Force Modelling for Drilling of Fiber-Reinforced Composites

Mihai-Bogdan Lazar

Although used in a very large variety of applications, drilling is one of the most complex and least understood manufacturing processes. Most of the research on drilling was done in the field of metal cutting for mechanical parts since, in this case, high ...

EPFL2012

Selection of Optimal Cutting Conditions for Pocket Milling Using Genetic Algorithm

Paul Xirouchakis, Saurabh Aggarwal

Pocket milling is the most known machining operation in the domains of aerospace, die and mold manufacturing. In the present work, GA-OptMill, a Genetic Algorithm (GA) based optimization system for minimization of pocket milling time, is developed. A wide ...

Springer London Ltd2013