Publications associées à Technétium 99m

Evaluation of materials for iodine and technetium immobilization through sorption and redox-driven processes

Radioactive iodine-129 (I-129) and technetium-99 (Tc-9(9)) pose a risk to groundwater due to their long half-lives, toxicity, and high environmental mobility. Based on literature reviewed in Moore et al. (2019) and Pearce et aL (2019), natural and engineer ...

ELSEVIER2020

Comparison of 2D simultaneous multi-slice and 3D GRASE readout schemes for pseudo-continuous arterial spin labeling of cerebral perfusion at 3 T

Tobias Kober, Bénédicte Marie Maréchal, Tom Hilbert

Objective In this perfusion magnetic resonance imaging study, the performances of different pseudo-continuous arterial spin labeling (PCASL) sequences were compared: two-dimensional (2D) single-shot readout with simultaneous multislice (SMS), 2D single-sho ...

SPRINGER2021

Validation of the BEAMS3D neutral beam deposition model on Wendelstein 7-X

Jonathan Graves, David Pfefferlé, Mike Machielsen, Adnan Ali, Yu Gao

The neutral beam deposition model in the BEAMS3D code is validated against neutral beam attenuation data from Wendelstein 7-X (W7-X). A set of experimental discharges where the neutral beam injection system of W7-X was utilized were reconstructed. These di ...

IOP Publishing Ltd2020

Gold nano-mesh synthesis by continuous-flow X-ray irradiation

Giorgio Margaritondo, Ying Chen

X-ray irradiation has been extensively used in recent years as a fabrication step for nanoparticles and nanoparticle systems. A variant of this technique, continuous-flow X-ray irradiation, has recently been developed, and offers three important advantages ...

INT UNION CRYSTALLOGRAPHY2019

Toward a Full-Flexible and Fast-Prototyping TOF-PET Block Detector Based on TDC-on-FPGA

Edoardo Charbon, Esteban Venialgo Araujo

Typically, a time-of-flight (TOF) positron emission tomography (PET) block detector is built using application-specific integrated circuits (ASICs), since they integrate a high number of channels at a reasonable power consumption and into a small area. How ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2019

Synergism between non-thermal plasma and photocatalysis: Implicationsin the post discharge of ozone at a pilot scale in a catalytic fixed-bed reactor

Sami Rtimi

This study focuses on Butyraldehyde (C4H8O) degradation using catalytic ozonation oriented to the optimization of non-thermal plasma/photocatalytic coupled processes. After the first oxidation by non-thermal plasma coupled photocatalytic processes, a secon ...

ELSEVIER SCIENCE BV2019

Control and data acquisition software upgrade for JET gamma-ray diagnostics

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Martinus Gijs, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Bruno Emanuel Ferreira De Sousa Correia

The Joint European Torus (JET), the largest magnetic confinement plasma physics experiment in operation, has a large amount of key diagnostics for physics exploration and machine operation, which include several Gamma Ray Diagnostics. The Gamma-Ray Spectro ...

ELSEVIER SCIENCE SA2018

Development of a processing route for carbon allotrope-based TiC porous nanocomposites

Paul Bowen

Ti-foils are currently used as a spallation target material to produce radioisotopes for physics research at the ISOLDE facility at CERN. However, radioisotope production rates often decrease over time due to material degradation from high operation temper ...

2017

Increasing the stability of nanofluids with cavitating flows in micro orifices

Yusuf Leblebici, Morteza Ghorbani

One of the most critical challenges for nanofluids in practical applications is related to their stability and reusability since a gradual agglomeration of nanoparticles in nanofluids occurs with time and is accelerated by heating. In this study, we propos ...

Amer Inst Physics2016

Energy-selective neutron imaging for materials science

Steven Luc X Peetermans

Common neutron imaging techniques study the attenuation of a neutron beam penetrating a sample of interest. The recorded radiograph shows a contrast depending on traversed material and its thickness. Tomography allows separating both and obtaining 3D spati ...

EPFL2015