Rapid deposition of hydrogenated microcrystalline silicon by a high current DC discharge
Publications associées (98)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
We report on the fabrication and electrical characterization of functionalized solid-state nanopores in low stress silicon nitride membranes. First, a pore of approximately 50 nm diameter was drilled using a focused ion beam technique, followed by the loca ...
Thin colloidal photonic crystals were grown using shear-flow crystallization of polystyrene colloidal nanoparticles. The arrays consist of two types of domains, which are clearly visible on scanning electron microscopy patterns. Both domains have cubic clo ...
The goal of the present study was to assess the possibility to change the composition of a calcium phosphate scaffold from a high-temperature phase to a phase only stable at or close to room temperature without macrostructural changes. For that purpose, ma ...
Process optimization and properties of lead zirconate titanate (PZT) films for piezoelectric micromachined ultrasonic transducers (pMUTs) for scanning probe devices will be presented. The goal of the work was a replacement of the tetragenic and mutagenic s ...
This work presents the preliminary results on application of mineral sacrificial layer that is prepared to structure LTCC (low temperature co-fired ceramic). The proposed method suggests utilization of a sacrificial paste, which remains "permanent" during ...
We have synthesized Si Nps rich submicron area within a thin SiO2 layer using a new method called “stencil-masked ion implantation”. It consists in implanting silicon ions at ultra-low energy through windows (from 50nm to 2μm) opened in a stencil mask cont ...
Focused Electron Beam Induced Deposition (FEBID) is a rapid prototyping technique for the investigation, production and modification of 2 and 3-D nanostructures. The process takes place at room temperature, in the high-vacuum chamber of a Scanning Electron ...
Syntheses of ZSM-5 coatings on stainless steel plates were carried out via the substrate heating method. The reaction mixture was kept at temperatures below 100 °C, while the metal plates were heated to temperatures above 100 °C. It was demonstrated that c ...
TiN/AlTiN, TiN/CrN and CrN/AlTiN multilayer coatings have been deposited by the cathodic arc evaporation technique. The period is in the range 7-200 nm for a total thickness of 3 μm. The period's control of the nanoscaled hard films is achieved, a priori, ...
This work was accomplished in the context of systematic examination of a role played by electrolyte cation composition in electroreduction processes. The electrochemical behaviour of molten salts systems where CsCl was used as solvent for potassium and cae ...