Inductive Power Link for a Wireless Cortical Implant with Biocompatible Packaging

This article presents an inductive power link for a cortical implant. The link includes a Class-E power amplifier, an inductive link, a matching network, and a rectifier. The coils of the inductive link are designed and optimized for a distance of 10mm (scalp thickness). The power amplifier is designed in order to allow closed loop power control by controlling the supply voltage. A new packaging topology is proposed in order to position the implant in the skull, without occupying much area, but still obtaining short distance between the remote powering coils. The package is fabricated using biocompatible materials such as PDMS and Parylene-C, and it includes the secondary coil, the matching network, and the rectifier. The power efficiency of the link is characterized for a wide range of load power (1-20mW) and found to be 8.1% for nominal load of 10mW. The matching network improves the power efficiency on the whole range, compared to the link without the matching network.

Inductive Power Link for a Wireless Cortical Implant With Two-Body Packaging

Michel Declercq, Catherine Dehollain, Kanber Mithat Silay

This paper presents an inductive power link for remote powering of a wireless cortical implant. The link includes a Class-E power amplifier, a gate driver, an inductive link, and an integrated rectifier. The coils of the inductive link are designed and optimized for remote powering from a distance of 10 mm (scalp thickness). The power amplifier is designed in order to allow closed-loop control of the power delivered to the implant, by controlling the supply voltage. Moreover, a gate driver is added to the system to drive the power amplifier and to characterize the gate losses. A new packaging topology is proposed in order to position the implant inside a hole in the cranial bone, without occupying a large area, but still obtaining a short distance between the remote powering coils. The package is fabricated by using biocompatible materials such as PDMS and Parylene-C. The power efficiency of the remote powering link is characterized for a wide range of load power (1-20 mW) delivered from the rectifier and is measured to be 24.6% at nominal load of 10 mW.

Institute of Electrical and Electronics Engineers2011

Remotely Powered Wireless Cortical Implants for Brain-Machine Interfaces

Kanber Mithat Silay

Brain-machine interfaces hold promise for restoring basic functions such as movement or speech for severely disabled patients, as well as for controlling neuroprosthetic devices for amputees. One of the major challenges of clinically viable neuroprostheses for chronic use is the implementation of fully implantable recording devices for stable, long-term recordings over large populations of neurons. Recent progress in the microelectronics and MEMS technologies has enabled miniaturization of microelectrode arrays which can be used for recording the neural activity of the brain and for stimulating the neurons. Nevertheless, the demanding requirements of fully implantable recording devices necessitate the incorporation of other active components with the microelectrodes. The presence of the active components in the implant requires power to be delivered to the device. Transcutaneous wires are commonly used for this purpose as well as for communication with the outside world. However, these wires pose the risk of infection to the patient. Another common method of powering is to utilize batteries in the implant. Nevertheless, this method is not desirable as the batteries have to be replaced at the end of their lifetime with a surgical procedure. This thesis presents the development of a remotely powered wireless cortical neural interface system for brain-machine interface applications. In the scope of this work, firstly, the requirements and specifications of the system are analyzed to examine the limits of operation. In addition, the thermal impact of cortical implant operation in the head is investigated to determine the maximum allowable power consumption in the implant. In order to supply power to the active components in the cortical implant, a closed-loop inductive remote powering link operating from a single external battery is implemented. The closed-loop operation enables adaptive delivery of power depending on the implant activity. For improving the power efficiency of the link, a discrete optimization algorithm is developed to design the geometry of the power transmission coils. In addition, application specific integrated circuits are designed to enhance the overall performance of the system and to decrease the footprint of the implant electronics. Moreover, wireless data communication for cortical implants is discussed and a solution for coexistence of the power and data links is presented. For implanting the cortical recording device into the body, a two-body packaging topology is proposed to position the implant inside the cranial bone. With this topology, the performance of the cortical neural interface is significantly improved. The fabricated cortical implants with the two-body package are characterized in air and in vitro. The power transfer efficiency of the closed-loop remote powering link operating from a single supply is measured to be 10.6% in vitro for 10 mW power delivered to the implant load. Finally, the operation of the implant in vitro is validated for over five weeks.

EPFL2012

A Closed-Loop Remote Powering Link for Wireless Cortical Implants

Michel Declercq, Catherine Dehollain, Kanber Mithat Silay

This paper presents a closed-loop remote powering link for wireless cortical implants. The link operates from a single power supply at the external reader and delivers power to the implant adaptively under changing load conditions. A feedback information is sent from the implant to the external reader about the power consumption in the implant and the external reader adapts the amount of transmitted power depending on this feedback. In addition, an in vitro measurement setup is fabricated in order to characterize the performance of the wireless energy transfer when the implant is immersed into saline solution. The implant is packaged by using biocompatible materials and the operation of the remote powering link is demonstrated in air and in vitro for a wide range of load power delivered from the voltage regulator. The power transfer efficiency of the overall closed-loop remote powering link is measured to be 10.6% in vitro at nominal load power of 10 mW. Finally, the operation of the implant in vitro is demonstrated over a five-week period.

Institute of Electrical and Electronics Engineers2013

Remotely Powered Wireless Cortical Implants for Brain-Machine Interfaces

Kanber Mithat Silay

EPFL2012