Real-Time State Estimation of the EPFL-Campus Medium-Voltage Grid by Using PMUs

Sergio Barreto Andrade, German Dario Flores Ponce, Jean-Yves Le Boudec, Mario Paolone, Marco Pignati, Miroslav Popovic, Paolo Romano, Styliani Sarri, Teklemariam Tsegay Tesfay, Dan-Cristian Tomozei, Lorenzo Zanni
2015
Article de conférence

Résumé

We describe the real-time monitoring infrastructure of the smart-grid pilot on the EPFL campus. We experimentally validate the concept of a real-time state-estimation for a 20 kV active distribution network. We designed and put into operation the whole infrastructure composed by the following main elements: (1) dedicated PMUs connected on the medium-voltage side of the network secondary substations by means of specific current/voltage transducers; (2) a dedicated communication network engineered to support stringent time limits and (3) an innovative state estimation process for real-time monitoring that incorporates phasor-data concentration and state estimation processes. Special care was taken to make the whole chain resilient to cyber-attacks, equipment failures and power outages. The achieved latency is within 65ms. The refresh rate of the estimated state is 20ms. The real-time visualization of the state estimator output is made publicly available, as well as the historical data (PMU measurements and estimated states). To the best of our knowledge, the work presented here is the first operational system that provides low-latency real-time state estimation by using PMU measurements of a real active distribution network.

Official source

https://infoscience.epfl.ch/record/203775?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

An Information-Centric Communication Infrastructure for Real-Time State Estimation of Active Distribution Networks

Mario Paolone, Marco Pignati, Paolo Romano, Styliani Sarri, Teklemariam Tsegay Tesfay

The evolution toward emerging active distribution networks (ADNs) can be realized via a real-time state estimation (RTSE) application facilitated by the use of phasor measurement units (PMUs). A critical challenge in deploying PMU-based RTSE applications at large scale is the lack of a scalable and flexible communication infrastructure for the timely (i.e., sub-second) delivery of the high volume of synchronized and continuous synchrophasor measurements. We address this challenge by introducing a communication platform called C-DAX based on the information-centric networking (ICN) concept. With a topic-based publish-subscribe engine that decouples data producers and consumers in time and space, C-DAX enables efficient synchrophasor measurement delivery, as well as flexible and scalable (re)configuration of PMU data communication for seamless full observability of power conditions in complex and dynamic scenarios. Based on the derived set of requirements for supporting PMU-based RTSE in ADNs, we design the ICN-based C-DAX communication platform, together with a joint optimized physical network resource provisioning strategy, in order to enable the agile PMU data communications in near real-time. In this paper, C-DAX is validated via a field trial implementation deployed over a sample feeder in a real-distribution network; it is also evaluated through simulation-based experiments using a large set of real medium voltage grid topologies currently operating live in The Netherlands. This is the first work that applies emerging communication paradigms, such as ICN, to smart grids while maintaining the required hard real-time data delivery as demonstrated through field trials at national scale. As such, it aims to become a blueprint for the application of ICN-based general purpose communication platforms to ADNs.

Ieee-Inst Electrical Electronics Engineers Inc2015

Chargement

An active distribution network (ADN) is an electrical-power distribution network that implements a real-time monitoring and control of the electrical resources and the grid. Effective monitoring and control is realised by deploying a large number of sensing and actuating devices and a communication network to facilitates the two-way transfer of data. The reliance of ADN operations on a large number of electronic devices and on communication networks poses a challenge in protecting the system against cyber-attacks. Identifying these challenges and commissioning appropriate solutions is of utmost importance to realize the full potential of a smart grid that seamlessly integrates distributed generation, such as renewable energy sources. As a first step, we perform a thorough threat analysis of a typical ADN. We identify potential threats against field devices, the communication infrastructure and servers at control centers. We also propose a check-list of security solutions and best practices that guarantee a distribution network's resilient operation in the presence of malicious attackers, natural disasters, and other unintended failures that could potentially lead to islanded communication zone. For the next step, we investigate the security of MPLS-TP, a technology that is mainly used for long-distance inter-domain communication in smart grid. We find that an MPLS-TP implementation in Cisco IOS has serious security vulnerabilities in two of its protocols, BFD and PSC. These two protocols control protection-switching features in MPLS-TP. In our test-bed, we demonstrate that an attacker who has physical access to the network can exploit the vulnerabilities in order to inject forged BFD or PSC messages that affect the network's availability. Third, we consider multicast source authentication for synchrophasor data communication in grid monitoring systems (GMS). Ensuring source authentication without violating the stringent real-time requirement of GMS is challenging. Through an extensive review of existing schemes, we identified a set of schemes that satisfy some desirable requirements for GMS. The identified schemes are ECDSA, TV-HORS and Incomplete- key-set. We experimentally compared these schemes using computation, communication and key management overheads as performance metrics. A tweak in ECDSA's implementation to make it use pre-generated tokens to generate signatures significantly improves the computation overhead of ECDSA, making it the preferred scheme for GMS. This finding is contrary to the generally accepted view that asymmetric cryptography is inapplicable for real-time systems. Finally, we studied a planning problem that arises when a utility wants to roll out a software patch that requires rebooting to all PMUs while maintaining system observability. The problem we address is how to find a partitioning of the set of the deployed PMUs into as few subsets as possible such that all the PMUs in one subset can be patched in one round while all the PMUs in the other subsets provide full observability. We show that the problem is NP-complete in the general case and and formulated it as binary integer linear programming (BILP) problem. We have also provided an heuristic algorithm to find an approximate solution. Furthermore, we have identified a special case of the problem where the grid is a tree and provided a polynomial-time algorithm that finds an optimal patching plan that requires only two rounds to patch the PMUs.

EPFL2017

Chargement

, ,

One of the challenging tasks related to the realtime control of Active Distribution Networks (ADNs) is represented by the development of fast (i.e. sub-second) state estimation (SE) processes. As known, the problem of SE of power networks links the measurements performed in the network with a set of non-linear equations representing the links between the network node voltage phasors (i.e. the system states) and measured quantities. The calculation of these voltages is accomplished by the solution of a minimization problem by using, for instance, Weighted Least Squares (WLS) or Kalman filter (KF) methods. The availability of phasor measurement units (PMUs), characterized by high accuracy and able to directly measure node voltage phasors, allows, in principle, a simplification of the SE problem. Within this framework, the paper has two aims. The first is to propose a procedure based on the use of the Iterated KF (IKF) aiming at making achievable, in a straightforward manner, the SE of ADNs integrating PMU measurements. The second goal is to present a sensitivity analysis of the performances of WLS vs IKF methods as a function of the measurements and process covariance matrices.

IEEE Power Engineering Society and Technische Universität Berlin, Germany2012

Chargement

EPFL2017

An Information-Centric Communication Infrastructure for Real-Time State Estimation of Active Distribution Networks

Mario Paolone, Marco Pignati, Paolo Romano, Styliani Sarri, Teklemariam Tsegay Tesfay

Ieee-Inst Electrical Electronics Engineers Inc2015