Publication

A 2.4-GHz low power polar transmitter for wireless body area network applications

Résumé

A 2.4 GHz low power polar transmitter is proposed in this paper. A dynamic biasing circuit, controlled by a digital envelope signal, is used as a direct digital-to-RF envelope converter. It effectively linearizes the input-output characteristic of the overdriven cascode class-C power amplifier used as the output stage, by dynamically adjusting the bias voltage of the cascode transistor. An equivalent baseband model of the transmitter is presented and used to optimize system parameters and give initial assessment of the achievable performance in terms of efficiency and linearity. Based on these simulations, parameters for transistor-level implementation of the bias circuit are derived. The transmitter is designed in a 65 nm CMOS technology. The post layout simulations indicate that the transmitter successfully meets the requirements of the IEEE 802.15.6 standard for wireless body area networks. The simulated amplifier consumes 4.75 mA from a 1.2 V supply while delivering 1.45 dBm of output power with a peak efficiency of 24 %. The entire transmitter, including the PLL, consumes 7.5 mA.

À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
Concepts associés (36)
Equivalent circuit
In electrical engineering, an equivalent circuit refers to a theoretical circuit that retains all of the electrical characteristics of a given circuit. Often, an equivalent circuit is sought that simplifies calculation, and more broadly, that is a simplest form of a more complex circuit in order to aid analysis. In its most common form, an equivalent circuit is made up of linear, passive elements. However, more complex equivalent circuits are used that approximate the nonlinear behavior of the original circuit as well.
Tension de polarisation
In electronics, biasing is the setting of DC (direct current) operating conditions (current and voltage) of an active device in an amplifier. Many electronic devices, such as diodes, transistors and vacuum tubes, whose function is processing time-varying (AC) signals, also require a steady (DC) current or voltage at their terminals to operate correctly. This current or voltage is called bias. The AC signal applied to them is superposed on this DC bias current or voltage.
Gamme dynamique
La gamme dynamique, ou plage dynamique ou simplement dynamique est le rapport de la plus grande à la plus petite valeur d'une grandeur. Cette grandeur peut caractériser l'intensité d'un son ou d'une lumière. Elle est mesurée par une valeur logarithmique en base 10 (décibels) ou en base 2 (bits ou « diaphs »). En photographie, le terme décrit le rapport entre l'intensité lumineuse la plus élevée et l'intensité la plus faible qu'un appareil photographique peut capturer.
Afficher plus
Publications associées (115)

An Ultralow-Power Triaxial MEMS Accelerometer With High-Voltage Biasing and Electrostatic Mismatch Compensation

Kyojin Choo, Li Xu, Yimai Peng

This article presents a triaxial micro electromechani-cal system (MEMS) capacitive accelerometer using a high-voltage biasing technique to achieve high resolution with ultralow power. The accelerometer system generates a differential pair of high voltages ...
Piscataway2024

Fab-to-fab and run-to-run variability in 130 nm and 65 nm CMOS technologies exposed to ultra-high TID

Jean-Michel Sallese, Adil Koukab, Gennaro Termo, Stefano Michelis

The discovery of a large fab-to-fab variability in the TID response of the CMOS technologies used in the design of ASICs for the particle detectors of the HL-LHC triggered a monitoring effort to verify the consistency of the CMOS production process over ti ...
IOP Publishing Ltd2023

Intelligent RF System for Ultra Low Power Spectrum Sensing with Machine Learning

Naci Pekçokgüler

The crowdedness of the RF spectrum constitutes problems in communication, however it also accommodates large amount of useful information. This information can be used to determine existing signals and operating contexts. However, spectrum condition varies ...
EPFL2023
Afficher plus
MOOCs associés (15)
Electronique II
Introduction à l’électronique analogique- seconde partie. Fonctions linéaires de base réalisée à l’aide de transistor bipolaire.
Electronique II
Introduction à l’électronique analogique- seconde partie. Fonctions linéaires de base réalisée à l’aide de transistor bipolaire.
Electronique I
Introduction à l’électronique analogique- première partie. Fonctions de base réalisées à l’aide des amplificateurs opérationnels.
Afficher plus

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.