Multiplet features and magnetic properties of Fe on Cu(111): From single atoms to small clusters

The observation of sharp atomiclike multiplet features is unexpected for individual 3d atoms adsorbed on transition-metal surfaces. However, we show by means of x-ray absorption spectroscopy and x-ray magnetic circular dichroism that individual Fe atoms on Cu(111) exhibit such features. They are reminiscent of a low degree of hybridization, similar to 3d atoms adsorbed on alkali-metal surfaces. We determine the spin, orbital, and total magnetic moments, as well as magnetic anisotropy energy for the individual Fe atoms and for small Fe clusters that we form by increasing the coverage. The multiplet features are smoothened and the orbital moment rapidly decreases with increasing cluster size. For Fe monomers, comparison with density functional theory and multiplet calculations reveals a d(7) electronic configuration, owing to the transfer of one electron from the 4s to the 3d states.

Magnetic properties of surface-adsorbed single rare earth atoms, molecules, and atomic scale clusters

Aparajita Singha

This thesis presents combined experimental and theoretical investigations of nanoscale, surface-supported magnets based on rare earths (RE) to understand and control the magnetic properties down to the scale of single atoms. We present the effects of adatom-substrate interaction on the magnetic properties of isolated single RE atoms using x-ray absorption spectroscopy (XAS), x-ray magnetic circular dichroism (XMCD), and multiplet analysis. Our systematic investigations of Dy, Ho, Er, and Tm adatoms adsorbed on Pt(111), Cu(111), Ag(100), and Ag(111), reveal that the REs can possess two types of 4f occupations, namely divalent 4f^n and trivalent 4f^(n-1). The trivalent state is realized in presence of low promotion energy of the RE and strong hybridization of their external spd shell with the surrounding environment. Notably, none of the REs exhibit magnetic hysteresis, suggesting that magnetic relaxation is faster than about 10 seconds. We also report on the effect of adatom-adatom interaction by studying the size-dependent magnetic properties of Er clusters adsorbed on Cu(111). Combining XMCD, scanning tunneling microscopy (STM), and mean-field nucleation theory we reveal that the adatom-adatom interaction dominates over the adatom-substrate interaction in Er clusters starting from the size of three atoms. Consequently the easy axis of Er changes from in-plane for the single atoms and dimers to out-of-plane for trimers and bigger clusters. In addition, the out-of-plane magnetic anisotropy of 2.9 meV/atom results in magnetic hysteresis at 2.5 K in all clusters starting from trimers. With a magnetic lifetime of approximately 2 minutes at 0.1 T, the Er trimers are one of the smallest metal-supported ferromagnetic clusters observed so far. The investigation of adatom-adatom interaction is further extended by studying 4f-3d heterodimers namely, Ho-Co adsorbed on thin insulating layers of MgO. Their magnetic easy axis is oriented out-of-plane. Using spin-polarized STM we have detected spin-excitations in these heterodimers at ±20 and ±8 meV. We have identified the origin behind these spin-excitations using an effective spin Hamiltonian model, which indicates that, given a ferromagnetic exchange interaction between Ho and Co, the most intense feature at ±20 meV corresponds to a transition in which the spin moment of Co is strongly diminished. This is further accompanied by an overall change of the total magnetic moment of the heterodimer, i.e., ¿J=-1. In contrast, the weaker transition at ±8 meV occurs following a change in the out-of-plane moment of Ho while the total moment of the heterodimer remains intact i.e., ¿J=0. Notably, we observe an effective g factor of 3.1 for the ±20 meV transition, which significantly exceeds the free electron value of 2. In addition, the ferromagnetic coupling between Ho and Co is very unusual compared to the ferrimagnetic exchange interaction known for the bulk 4f-3d compounds, especially those derived from the late lanthanides. Nonetheless, this marks the first evidence of spin-excitations in the smallest 4f containing cluster. The knowledge gained on the fundamental aspects of magnetism in surface-supported REs combined with the continued parallel search for magnetic stability down to single atoms, enabled us to achieve magnetic remanence in single adatoms with lifetimes of the order of 1000 s at 2.5 K. In addition we have achieved significantly enhanced hysteresis and magnetic lifetime in TbPc2.

EPFL2017

Magnetism of individual adatoms and of epitaxial monolayers

Anne Lehnert

This thesis reports on the magnetism of low coordinated Fe and Co atoms in different chemical and electronic environments. The objective of this research was to contribute to the fundamental understanding of the magnetic properties, such as magneto-crystalline anisotropy energy (MAE), orbital and spin magnetic moment, of surface supported transition metal (TM) atoms and one atomic layer thick epitaxial TM films. A detailed knowledge on the interplay of electronic hybridization and magnetic properties is mandatory to elaborate new materials with high perpendicular magnetic anisotropy and acceptable writing field for future use in magnetic recording devices. The magnetic properties of the different experimental systems were investigated by x-ray absorption spectroscopy, x-ray magnetic circular dichroism, and magneto-optical Kerr effect (MOKE) and they were correlated to the morphology obtained by scanning tunneling microscopy (STM). The first part focuses on the effect of electronic hybridization between isolated 3d TM atoms and different kinds of substrates. First, we considered 4d and 5d TM substrates known for their high magnetic polarizability due to the close onset of ferromagnetism. Deposition of single Fe and Co atoms on Rh(111), Pd(111), and Pt(111) produces an increasing MAE going from Rh to Pd and finally to Pt that we directly correlate to the increasing spin-orbit constant of the substrate interlinking the induced magnetic moment and the MAE. Further we investigated single Fe and Co atoms on two different insulating layers, namely Al2O3/Ni3Al(111) and Cu2N/Cu(001), providing an efficient decoupling of the TM 3d states from the conduction electrons of the substrates. In case of the alumina film the absorption spectra of Fe and Co show a pronounced multiplet structure. On Cu2N the multiplet features of the adatoms are less defined due to the lower thickness of the screening layer. On both insulating layers we find a common out-of-plane easy axis, highly unquenched orbital moments, and giant MAE values of several meV/atom which are due to the formation of strong anisotropic bonds with the O and N atoms, respectively. The second part is dedicated to single atom thick layers of Fe and Co deposited on Pt(111) and Rh(111). We find the MAE to be strongly enhanced compared with bulk and we establish a direct proportionality between the induced magnetic moment of the topmost substrate layer and the MAE. The study of bimetallic Fe1-xCox alloys on platinum reveal a material with high MAE (0.5 meV at the equiatomic composition), large saturation magnetization (3μB to 2μB going from Fe to Co), and perpendicular magnetization easy axis. These characteristics hint at new possibilities for the further miniaturization of the grain size in recording devices. In the last part the theoretical description of the MOKE for ultra-thin films is extended to the transverse geometry and improved analytic formulae for the polar and longitudinal geometry are presented. This finding was used to optimize the Kerr signal for a new MOKE setup which is fully integrated in an ultrahigh vacuum chamber combining in situ MOKE and STM. The setup performance was demonstrated for a continuous film of 0.9 monolayers (ML) Co/Rh(111) with in-plane easy axis and for a superlattice of nanometric double layer Co islands on Au(11,12,12) with out-of-plane easy axis. The detection limit is 0.5 ML for transverse and 0.1 ML for polar Kerr geometry corresponding for island superlattices with the density of Co/Au(11,12,12) to islands composed of about 50 atoms. Moreover, the setup holds two independent ways to measure the MAE which is either by thermally induced magnetization reversal or by applying a torque onto the magnetization by turning the magnetic field. Both ways yield similar results for 1.1 ML Co/Au(11,12,12).

EPFL2009

Investigation of low-dimensional supramolecular architectures by low-temperature scanning tunneling microscopy

Sylvain Clair

In this thesis we report investigations on supramolecular architectures assembled at well-defined metal surfaces. Supramolecular chemistry is dedicated to the study and use of non-covalent interactions to build highly organized molecular arrangements, aiming ultimately at creating systems with tailored properties and useful functions. The adaptation of its powerful principles to fabricate molecular systems at surfaces has already been proven to be very promising; the extended possibilities for the choice of on the one hand molecules with defined size, shape, symmetry and function, and on the other hand substrates with controlled composition, symmetry and patterning allow for a quasi-infinite tuning of the structure and properties of the respective assemblies. The Scanning Tunneling Microscope (STM) is a tool particularly efficient for the nanoscale elucidation of supramolecular systems at surfaces, simultaneously providing topographic and spectroscopic information at the single-atom level. In this regard, a new Low-Temperature STM (LT-STM) operational at temperatures in the range 5 to 400 K has been constructed. A detailed description of the instrument is provided and the demonstration of its exquisite performance represents a major achievement. In addition to local STM studies, complementary experiments were performed with a synchrotron radiation source using integral techniques, namely X-ray Absorption Spectroscopy (XAS) and X-ray Magnetic Circular Dichroism (XMCD). We present results obtained with the linear organic linker 1,4-benzenedicarboxylic acid (terephthalic acid - TPA) on the Au(111), Cu(111) and Cu(100) surfaces. The three-dimensional design principles of supramolecular chemistry could be successfully adapted to these low-dimensional systems. TPA molecules adsorbed on Au(111) organize in two-dimensional molecular sheets, wherein the typical one-dimensional hydrogen-bonded chain motif is found. We show that the inhomogeneities induced by the surface reconstruction can be used to examine the response of the supramolecular self-assembly. In particular, variations in the hydrogen bond length of up to 20% are encountered. On Cu(111), a strict commensurability of the supramolecular sheet to the substrate is not possible because of the reduced lattice spacing of the latter, and the creation of defects is analyzed. Due to their peculiar reactivity, the elbow sites of the reconstructed Au(111) surface act as nucleation centers in the epitaxial growth of transition metals (Fe, Co, Ni), leading to the formation of regular arrays of nanoscale metallic islands. We take advantage of this patterning to steer the formation of metallosupramolecular nano-architectures. Co-deposited TPA molecules attack both Fe and Co clusters and metal-carboxylate linkages evolve. Depending on the deposition parameters, nanoporous grids, mesoscopically organized stripes or truly one-dimensional linkages are obtained. Furthermore, the dynamics of the formation of the nanogrids are monitored in situ. Finally, we report investigations of the magnetic and electronic properties of surface-supported coordination architectures by means of XAS and XMCD. We studied Fe-terephthalate systems engineered on a Cu(100) substrate. Both mononuclear Fe(TPA)4 compounds and diiron centers structures in 2D Fe-TPA lattices exhibit a paramagnetic behavior. Moreover, we demonstrate the decisive influence of the ligand rather than the substrate on the electronic ground state of the metal centers, thus illustrating new vistas to effectively tailor the valence state and magnetic moment of transition metal atoms at surfaces.

EPFL2004