Low-temperature growth of n(++)-GaN by metalorganic chemical vapor deposition to achieve low-resistivity tunnel junctions on blue light emitting diodes
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Monolayer transition metal dichalcogenides (TMD) such as molybdenum disulfide (MoS2), tungsten diselenide (WSe2) and tungsten disulfide (WS2), have shown in the last years remarkable physical properties. These direct badgap three-atoms thick monolayers, wi ...
Blue light-emitting diodes based on III-nitride semiconductors are nowadays widely used for solid-state lighting. They exhibit impressive figures of merit like an internal quantum efficiency close to 100%. This value is intriguing when considering the high ...
Ca as an unintentional impurity has been investigated in III-nitride layers grown by molecular beam epitaxy (MBE). It is found that Ca originates from the substrate surface, even if careful cleaning and rinsing procedures are applied. The initial Ca surfac ...
For on-chip data communication with galvanic isolation, a monolithically integrated optocoupler is strongly desired. For this purpose, silicon (Si) avalanche mode LEDs (AMLEDs) offer a great potential. However such AMLEDs have a relatively low internal qua ...
IEEE2018
Group III-nitrides have been considered a promising choice for the realization of optoelectronic devices since 1970. Since the first demonstration of the high-brightness blue light-emitting diodes (LEDs) by Shuji Nakamura and coworkers, the fabrication of ...
EPFL2015
The III-nitride semiconductor material system - (InAlGa)N - is of highest interest for optoelectronic applications due to its direct bandgap, tunable from the ultraviolet to the infrared spectral range. The most well-known are white light-emitting diodes, ...
EPFL2014
, , , ,
Two-dimensional (2D) materials are a new type of materials under intense study because of their interesting physical properties and wide range of potential applications from nanoelectronics to sensing and photonics. Monolayers of semiconducting transition ...
Amer Chemical Soc2014
Polycrystalline zinc oxide (ZnO) films, prepared by low-pressure chemical vapor deposition are investigated in this thesis. ZnO belongs to the class of transparent conductive oxide materials, as it is transparent to light from the visible to the near-infra ...
EPFL2013
, , , , ,
Highly transparent electrodes with a well-tuned refractive index are essential for a wide range of optoelectronic devices, such as light emitting diodes and solar cells. Here, it is shown that the transparency of ZnO:Al can be improved and its refractive i ...
Wiley-Blackwell2016
Over the last two decades III-nitride optoelectronic devices have experienced an impressive evolution in terms of performance. However, their potential is far from being fully exploited. Although they offer bandgaps from the deep UV to the infrared spectra ...
