In-situ and post annealing effect on the microstructure and the optical properties of black Cu-Co-Mn oxide spinel coating for Parabolic Trough Collector (PTC) applications
Publications associées (32)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Syntheses of ZSM-5 coatings on stainless steel plates were carried out via the substrate heating method. The reaction mixture was kept at temperatures below 100 °C, while the metal plates were heated to temperatures above 100 °C. It was demonstrated that c ...
The microstructure, chemical and phase composition of the hard Ni-P-Ti layer formed on the Ti-6Al-4V alloy after duplex surface treatment were investigated by light microscopy, X-ray diffraction, scanning electron microscopy and analytical/high-resolution ...
Microcrystalline hydrogenated silicon films (muc-Si:H) have been deposited by a high current DC plasma in argon-silane-hydrogen mixtures at growth rates up to 10 nm/s and at substrate temperatures below 500 degreesC. Scanning electron microscopy, X-ray dif ...
Information for phase identification may be gathered in the electron transmission microscope with spatial resolution down to the nanometre scale. Energy dispersive X-ray and electron energy loss spectrometries are based on inelastic electron/sample interac ...
A novel C-Nafton/Fe-ion structured fabric capable of mediating Orange II decomposition in Fenton-immobilized photoassisted reactions is presented. The catalyst preparation requires the right balance between the amount of the Nafion necessary to protect the ...
This work presents the preliminary results on application of mineral sacrificial layer that is prepared to structure LTCC (low temperature co-fired ceramic). The proposed method suggests utilization of a sacrificial paste, which remains "permanent" during ...
The possibility of controlling materials properties by tailoring their substructure at the nanometer scale is a current topic of great interest. To do so, a fundamental understanding of the growth mechanism is of key importance and an analytical challenge ...
Structure and morphology of solid particles in precipitation from aqueous solutions correlate with formation (solution) conditions and thus reflect the growth mechanism. Calcium phosphate precipitation obtained from dilute aqueous solutions at room and bod ...
Pb1-xCaxTiO3 thin films with x = 0-0.3 for pyroelectric applications were deposited on platinized silicon wafers by chemical solution processing. Ca-substitution for Pb in PbTio(3) results in a reduced cia ratio of the unit cell, which, in turn, leads to b ...
Piezoelectric coatings of PbZrxTi1-xO3 (PZT) were deposited on standard telecommunication fibers. The PZT coatings were produced by reactive de magnetron sputtering of metal targets in pure oxygen atmosphere. The deposition was carried out at substrate tem ...