Spatial analysis of karst conduit networks and determination of parameters controlling the speleogenesis along preferential lithostratigraphic horizons

The main objective of this thesis is to improve the understanding of the position and characteristics of karst conduits within a rock massif. Such a characterisation is an important issue in civil engineering and in hydrogeology. Today in practice dissolution voids are considered as random in most cases. However, it is obvious for karst researchers that dissolution void distribution is not random, but defined by parameters controlling the speleogenesis. We developed a method to analyse the 3D geometry of cave systems in order to demonstrate from a statistical point of view that karst conduits position is not random. The analysis of several among the largest cave systems in the World (more than 1500 km of analysed cave conduits) confirmed for the first time quantitatively that the development and position of karst conduits under phreatic conditions is strongly related to a restricted number of so called inception horizons. An inception horizon – a concept introduced by Lowe (1992) – is a part of a lithostratigraphic succession that is particularly susceptible to the effects of the earliest cave forming processes by virtue of physical, lithological or chemical deviation from the predominant carbonate facies within the formation. We demonstrate that probably less than 10 % of the existing bedding partings of a limestone sequence are inception horizons and guide more than 70 % of the phreatic conduits. Our analysis clearly confirms that the influence of these horizons onto the 3D geometry of cave systems is high. Based on the 3D analysis of cave systems as well as on field verifications, 18 inception horizons in six cave systems have been selected for field characterisation and sampling in order to identify the properties and processes that makes these particular lithostratigraphic horizons favourable to karstification. Around 200 rock samples from the horizons and the surrounding rock mass have been analysed. The results evidence that inception horizons have a thickness of some centimetres to decimetres and that it is possible to distinguish between 3 types of inception horizons: Inception horizons where the cave inception took place within the inception horizon (type 1); characterized by a slightly higher primary permeability, pyrite and quartz contents and lower matrix contents than the surrounding rock mass. Usually, fractures propagate through or occur within these horizons. Inception horizons where the cave inception took place at the contact with the inception horizon (type 2); characterized by a lower primary permeability and carbonate contents, but higher pyrite contents than the surrounding rock mass. Fractures usually are ending at these horizons. Inception horizons where the cave inception took place along bedding plane fractures (type 3); already a slippage of just a few millimetres, striation, brecciation and surface irregularities enhance openings along the sliding plane and cause a significant increase in permeability. Furthermore it