Simulation numérique du mouvement des fluides dans une cellule de Hall-Héroult

Sonia Pain
EPFL, 2006
Thèse EPFL

This work aims to investigate, by means of numerical simulation, the evolution of free surface flow in aluminium production cells, and especially the magnetohydrodynamic instabilities. We design a numerical method combining a level-set technique together with a finite element discretization, in order to solve the non-stationnary Navier-Stokes equations and the equation for the motion of the free surface. Our numerical experiments confirms results obtained by other authors and we study the evolution of instabilities calculated by a stationary program, ALUCELL.

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Sonia Pain
EPFL, 2006
Thèse EPFL

Résumé

Official source

https://infoscience.epfl.ch/record/83333?ln=fr

À propos de ce résultat

Concepts associés (8)

Concepts associés

Chargement

Publications associées (10)

Publications associées

Chargement

Analysis and numerical simulation of viscoelastic flows

Andrea Bonito

Mathematical and numerical aspects of viscoelastic flows are investigated here. Two simplified mathematical models are considered. They are motivated by a splitting algorithm for solving viscoelastic flows with free surfaces. The first model is a simplified Oldroyd-B model. Existence on a fixed time interval is proved in several Banach spaces provided the data are small enough. Short time existence is also proved for arbitrarily large data in Hölder spaces for the time variable. These results are based on the maximal regularity property of the Stokes operator and on the analycity behavior of the corresponding semi-group. A finite element discretization in space is then proposed. Existence of the numerical solution is proved for small data, as well as a priori error estimates, using an implicit function theorem framework. Then, the extension of these results to a stochastic simplified Hookean dumbbells model is discussed. Because of the presence of the Brownian motion, existence in a fixed time interval, provided the data are small enough, is proved only in some of the Banach spaces considered previously. The dumbbells' elongation is split in two parts, one satisfying a standart stochastic differential equation, the other satisfying a partial differential equation with a stochastic source term. A finite element discretization in space is also proposed. Existence of the numerical solution is proved for small data, as well as a priori error estimates. A numerical algorithm for solving viscoelastic flows with free surfaces is also described. This algorithm is based on a splitting method in time and two different meshes are used for the space discretization. Convergence of the numerical model is checked for the pure extensional flow and the filling of a pipe. Then, numerical results are reported for the stretching of a filament and for jet buckling.

EPFL2006

Chargement

Numerical Simulation of Macrosegregation : a Comparison between FVM and FEM Predictions and a Confrontation with Experiments

Jean-Luc Desbiolles, Jacques Rappaz, Michel Rappaz

Micro-macrosegregation calculations have been performed for a rectangular cavity containing either a Pb-48 wt pct Sn alloy or a Sn-5 wt pct Pb alloy. The numerical results calculated with a finite volume method (FVM) and a finite element method (FEM) are compared with experimental results previously obtained by Hebditch and Hunt.([1]) The two methods are based on the same average conservation equations governing heat and mass transfer and the same assumptions: lever rule, equal and constant density of the solid and liquid phases (except in the buoyancy term), permeability of the mushy zone given by the Carman-Kozeny relation, and no transport of the solid phase. Although the same parameters are used in both calculations, small differences are observed as a result of the different formulations. In particular, the instabilities appearing in the mushy zone (channels) of the Sn-5 wt pct Pb alloy are more pronounced with the FVM formulation as compared with FEM, whereas the opposite trend is observed for the Pb-48 wt pct Sn alloy. Nevertheless, the final segregation maps at the end of solidification compare fairly well with the experimental findings.

1998

Chargement

Numerical simulation of free surface flows

Vincent Maronnier, Marco Picasso, Jacques Rappaz

A numerical model is presented for the simulation of complex fluid flows with free surfaces. The unknowns are the velocity and pressure fields in the liquid region, together with a function defining the volume fraction of liquid. Although the mathematical formulation of the model is similar to the volume of fluid (VOF) method, the numerical schemes used to solve the problem are different. A splitting method is used for the time discretization. At each time step, two advection problems and a generalized Stokes problem are to be solved. Two different grids are used for the space discretization. The two advection problems are solved on a fixed, structured grid made out of small rectangular cells, using a forward characteristic method. The generalized Stokes problem is solved using a finite element method on a fixed, unstructured mesh. Numerical results are presented for several test cases: the filling of an S-shaped channel, the filling of a disk with core, the broken dam in a confined domain. (C) 1999 Academic Press.

1999

Chargement

Simulation informatique

vignette|upright=1|Une simulation informatique, sur une étendue de , de l'évolution du typhon Mawar produite par le Modèle météorologique Weather Research and Forecasting La simulation informatique

Méthode des éléments finis

En analyse numérique, la méthode des éléments finis (MEF, ou FEM pour finite element method en anglais) est utilisée pour résoudre numériquement des équations aux dérivées partielles. Celles-ci pe

Direct numerical simulation

A direct numerical simulation (DNS) is a simulation in computational fluid dynamics (CFD) in which the Navier–Stokes equations are numerically solved without any turbulence model. This means that the