In robotics, a manipulator is a device used to manipulate materials without direct physical contact by the operator. The applications were originally for dealing with radioactive or biohazardous materials, using robotic arms, or they were used in inaccessible places. In more recent developments they have been used in diverse range of applications including welding automation, robotic surgery and in space. It is an arm-like mechanism that consists of a series of segments, usually sliding or jointed called cross-slides, which grasp and move objects with a number of degrees of freedom.
In industrial ergonomics a manipulator is a lift-assist device used to help workers lift, maneuver and place articles in process that are too heavy, too hot, too large or otherwise too difficult for a single worker to manually handle. As opposed to simply vertical lift assists (cranes, hoists, etc.) manipulators have the ability to reach in to tight spaces and remove workpieces. A good example would be removing large stamped parts from a press and placing them in a rack or similar dunnage. In welding, a column boom manipulator is used to increase deposition rates, reduce human error and other costs in a manufacturing setting.
Additionally, manipulator tooling gives the lift assist the ability to pitch, roll, or spin the part for appropriate placement. An example would be removing a part from a press in the horizontal and then pitching it up for vertical placement in a rack or rolling a part over for exposing the back of the part.
One of the types of manipulators is balanced manipulator type MSP-250, controlled by the operator's hand. Such manipulators are used in various industries. Where there are special requirements to protect against fire and explosion, they may be driven by compressed air.
A welding manipulator can be either open arc or submerged arc. A welding manipulator can be used to weld horizontally and vertically and is ideal for job shops as they are robust, have high production volume capacity and a greater degree of flexibility in product engineering.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
To cope with constant and unexpected changes in their environment, robots need to adapt their paths rapidly and appropriately without endangering humans. this course presents method to react within mi
Covers force control, position control, selective compliance in robots, haptic control, impedance control, and achieving good performance in haptic devices.
A robotic arm is a type of mechanical arm, usually programmable, with similar functions to a human arm; the arm may be the sum total of the mechanism or may be part of a more complex robot. The links of such a manipulator are connected by joints allowing either rotational motion (such as in an articulated robot) or translational (linear) displacement. The links of the manipulator can be considered to form a kinematic chain. The terminus of the kinematic chain of the manipulator is called the end effector and it is analogous to the human hand.
In mechanical engineering, a kinematic chain is an assembly of rigid bodies connected by joints to provide constrained motion that is the mathematical model for a mechanical system. As the word chain suggests, the rigid bodies, or links, are constrained by their connections to other links. An example is the simple open chain formed by links connected in series, like the usual chain, which is the kinematic model for a typical robot manipulator. Mathematical models of the connections, or joints, between two links are termed kinematic pairs.
In this paper, we propose a metric called hitting flux which is used in the motion generation and controls for a robot manipulator to interact with the environment through a hitting or a striking motion. Given the task of placing a known object outside of ...
One can estimate the velocity and acceleration of robot manipulators by utilizing nonlinear observers. This involves combining inertial measurement units (IMUs) with the motor encoders of the robot through a model-based sensor fusion technique. This approa ...
This paper builds up the skill of impact aware non prehensile manipulation through a hitting motion by allowing the robot arm to come in contact with the environment with parts other than its end effector. Hitting with other joints allows us to manipulate ...