Field electron emission | EPFL Graph Search

Field electron emission, also known as field emission (FE) and electron field emission, is emission of electrons induced by an electrostatic field. The most common context is field emission from a solid surface into a vacuum. However, field emission can take place from solid or liquid surfaces, into a vacuum, a fluid (e.g. air), or any non-conducting or weakly conducting dielectric. The field-induced promotion of electrons from the valence to conduction band of semiconductors (the Zener effect) can also be regarded as a form of field emission. The terminology is historical because related phenomena of surface photoeffect, thermionic emission (or Richardson–Dushman effect) and "cold electronic emission", i.e. the emission of electrons in strong static (or quasi-static) electric fields, were discovered and studied independently from the 1880s to 1930s. When field emission is used without qualifiers it typically means "cold emission". Field emission in pure metals occurs in high electric

Etude par STM de la déposition d'agrégats d'or sur TiO2 et mesure de l'émission électronique secondaire induite par l'impact d'agrégats sur une surface

Pierre Convers

This thesis work focuses on impact and diffusion processes as well as equilibrium positions of a metal deposited on a surface. The metal is deposited in the form of clusters containing n atoms in a controlled way. Gold or silver clusters cations (Au+n and Ag+n ) are used. Their size (n ∈ [1, 9]), charge state and deposition energy (E = 10 - 4500 eV) are well defined. The surface being at room temperature during the deposition, can be annealed and transferred in a scanning tunnelling microscope (STM) after deposition. The variable temperature microscope was developed during this thesis. The approach of the tip is carried out by an axial motor, which renders the microscope very stable. The first part of this work treats of the evolution of gold deposited on a TiO2(110) surface. Position and size of gold islands created by cluster or atomic depositions are determined by STM. Compared to atomic deposition at the same energy (10 < E < 100 eV), the cluster deposition produces smaller islands with a large islands density after annealing at 800 K. Regardless the deposition conditions, gold atoms diffuse on the surface already at 300 K. The impact energy is the key parameter to reduce the diffusion by cluster or atomic implantation or defect creation. Upon a high energy deposition, part of the deposited gold is invisible to the STM. The fate of these gold atoms is unclear : they are either buried under the surface or ejected in vacuum at the impact. The control of the islands size should permit the creation of a stable system with an optimum catalytic activity (i. e. CO combustion). Research groups have shown that this activity is strongly influenced by the islands size. It is equal to zero if the diameter is greater than 5 nm. The second part of this work is devoted to the electron emission γ induced by the impact of silver clusters Ag+n on a Pt and HOPG surface. Measurements are made by varying the impact energy (and so the speed v) of size-selected clusters on a defined surface. Impact velocity ranges from 104 to 105 m/s, which is lower than the classical threshold. Nevertheless every cluster size produces an electron emission. A potential emission (γ(v=0) ≠ 0) is observed for the monomer on both surfaces, which is caused by excited ions in a metastable state. The γ(v) curves are increasing, and no mesurable oscillation are observed. This does not confirm earlier work by Meiwes-Broer et al. These authors found oscillations in γ on similar systems relating them to the electronic structure of the clusters and the surface. A model based on heating of the electron gas is developed. This model gives good agreements with the γ(v) curves. The electronic temperature is estimated to 3000-8000 K. Similar behavior on both surfaces (Pt and HOPG) depending of the cluster size is shown. This behavior is probably related to the geometrical structure of the clusters. Finally, a more pronounced molecular effect is observed for the HOPG : the number of electrons emitted by the impact of a Ag+n is up to 7 times higher than the number of electrons emitted by impacts of n independent atoms. This value is smaller than 2 for the Pt surface.

EPFL2005

On the Ohmic-dominant heating mode of capacitively coupled plasma inverted by boundary electron emission

Guang-Yu Sun, Haomin Sun

Electron emission from the boundary is ubiquitous in a capacitively coupled plasma (CCP) and precipitates nonnegligible influence on the discharge properties. Here, we present Particle-in-Cell/Monte Carlo Collision simulation of an Ohmic-dominant heating mode of the capacitively coupled plasma, where the stochastic heating vanishes and only Ohmic heating sustains the discharge due to sheath inversion by boundary electron emission. The inverted CCP features negative sheath potential without Bohm presheath, hence excluding plasma heating due to sheath edge oscillation. The particle and energy transport of the proposed heating mode is analyzed. The influence of boundary electron emission flux, source voltage, and neutral pressure on the transition between classic and Ohmic-dominant CCP heating modes is shown with designated simulation scans. A modified inverse sheath–plasma coupling due to excessive ionization is discovered. In the end, key indicators of the proposed heating mode in plasma diagnostics are provided for future experimental verifications.

2022

Etude par STM de la déposition d'agrégats d'or sur TiO2 et mesure de l'émission électronique secondaire induite par l'impact d'agrégats sur une surface

Pierre Convers

EPFL2005