Membrane technology | EPFL Graph Search

Membrane technology encompasses the scientific processes used in the construction and application of membranes. Membranes are used to facilitate the transport or rejection of substances between mediums, and the mechanical separation of gas and liquid streams. In the simplest case, filtration is achieved when the pores of the membrane are smaller than the diameter of the undesired substance, such as a harmful microorganism. Membrane technology is commonly used in industries such as water treatment, chemical and metal processing, pharmaceuticals, biotechnology, the food industry, as well as the removal of environmental pollutants. After membrane construction, there is a need to characterize the prepared membrane to know more about its parameters, like pore size, function group, material properties, etc., which are difficult to determine in advance. In this process, instruments such as the Scanning Electron Microscope, the Transmission electron Microscope, the Fourier Transform Infrared

Thermo-economic modeling of membrane processes for CO2 capture

Quoc Nhat Nam Pham

In the context of greenhouse gas emissions reduction, carbon capture and storage (CCS) is considered as a promising option, especially for power plants applications. Three different concepts are mainly investigated; pre-, oxy-fuel and post-combustion capture. For separating the CO2 from the other gases several technologies can be applied such as chemical or physical absorption, adsorption or membrane processes. The technology choice and performance is defined by the gas composition and flowrate, the CO2 concentration, the required CO2 purity and the technology availability. The technology performance is given by the separation efficiency, the thermal and mechanical energy demand and the costs. The aim of this project is to study membrane separation processes for CO2 capture applications and to compare the performance with other technology options for CO2 capture in power plants.

2013

Pretreatment options for micropollutant abatement before aquifer recharge in drinking water production: Assessment of UV/H2O2 and dense membranes

Robin Wünsch

Micropollutants (MP) such as residues of pharmaceuticals, industrial chemicals or pesticides can be detected in almost all water resources. Various processes can be used to abate them in drinking water treatment, e.g., ozonation, advanced oxidation processes (AOP), adsorption on activated carbon or membrane filtration. The selection of a suitable process combination is a complex task for water suppliers.This thesis compares two process chains in the context of a multi-barrier system including managed aquifer recharge (MAR). To protect soils and aquifers from MP in the future, an additional barrier against MP upstream of the MAR was investigated: (1) a full-stream treatment using the AOP UV/H2O2, and (2) a side-stream treatment with low-pressure reverse osmosis (LPRO) or nanofiltration (NF) and ozonation of the retentate to treat the concentrated MPs.Pilot-scale experiments were conducted to determine the relative abatements of MP by UV/H2O2 treatment and by a subsequent soil column treatment. Compared to a soil column fed with water without UV/H2O2 pretreatment, the performance of the combined process (UV/H2O2 + soil column) was more efficient. However, this could be explained by an additive effect of the individual processes.Relative abatements in the UV/H2O2 process are mainly based on the introduced UV fluence and hydroxyl radical exposure. These parameters could be calculated with a model based on the measured relative abatements of two MPs (probe compounds) and their kinetic data (second-order rate constants for the reactions with hydroxyl radical, absorbance and quantum yield).With this information, the relative abatements of other MPs could be predicted with an accuracy of ±20%. A sensitivity analysis of the model showed that the relative abatements of the selected probe compounds should be >50%. In this case, the accuracy of the calculated parameters depends mainly on the precision of the kinetic data.In the case of membrane-based treatment of water by LPRO or NF, a concentrate is produced. Ozonation to treat MP in the concentrate is accompanied by a formation of the possibly carcinogenic bromate by oxidation of bromide. To achieve the highest possible MP abatement with simultaneously low bromate formation, both membrane selection and subsequent concentrate ozonation were investigated. In laboratory tests with standardized concentrates, neither the water source nor the membrane type caused a change in bromate yield for similar relative MP abatements. However, NF membranes have lower relative retentions of bromide and MP than LPRO membranes, making NF concentrates more suitable for ozonation with limited bromate formation.A comparison of UV/H2O2 with membrane treatment showed that full-stream treatment with UV/H2O2 has about four times lower costs and an about five times lower environmental impact. In addition it achieves significantly higher disinfection. In contrast, side-stream treatment with LPRO causes up to two times lower impacts for the environment when the electrical energy source is wind or hydropower. This study thus contributes technical, economic, and environmental aspects to a holistic evaluation of the two process options.

EPFL2022

Rapid screening of nanopore candidates in nanoporous single-layer graphene for selective separations using molecular visualization and interatomic potentials

Luc Sébastien Bondaz, Rohit Karnik

Nanoporous single-layer graphene is promising as an ideal membrane because of its extreme thinness, chemical resistance, and mechanical strength, provided that selective nanopores are successfully incorporated. However, screening and understanding the transport characteristics of the large number of possible pores in graphene are limited by the high computational requirements of molecular dynamics (MD) simulations and the difficulty in experimentally characterizing pores of known structures. MD simulations cannot readily simulate the large number of pores that are encountered in actual membranes to predict transport, and given the huge variety of possible pores, it is hard to narrow down which pores to simulate. Here, we report alternative routes to rapidly screen molecules and nanopores with negligible computational requirement to shortlist selective nanopore candidates. Through the 3D representation and visualization of the pores' and molecules' atoms with their van der Waals radii using open-source software, we could identify suitable C-passivated nanopores for both gas- and liquid-phase separation while accounting for the pore and molecule shapes. The method was validated by simulations reported in the literature and was applied to study the mass transport behavior across a given distribution of nanopores. We also designed a second method that accounts for Lennard-Jones and electrostatic interactions between atoms to screen selective non-C-passivated nanopores for gas separations. Overall, these visualization methods can reduce the computational requirements for pore screening and speed up selective pore identification for subsequent detailed MD simulations and guide the experimental design and interpretation of transport measurements in nanoporous atomically thin membranes.

AIP Publishing2021