Photoluminescence from a single InGaAs epitaxial quantum rod
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This work shows that the critical thickness for the two-dimensional-three-dimensional growth mode transition during the growth of Ga0.65In0.35As on GaAs(001) can be significantly increased by increasing the growth rate. This experimental finding is corrobo ...
Fully processed VLSI GaAs MESFET circuits, available through the MOSIS service, have recently been shown to be electrically stable after 3-h thermal cycles at 500-degrees-C. It is therefore feasible to epitaxially regrow photonic device heterostructures di ...
GaAs/AlxGa1-xAs multiple-quantum-well structures with identical well thicknesses (almost-equal-to 119 angstrom) but with different Al contents x in the barrier (x almost-equal-to 0. 1, 0.2, 0.45, and 1) were grown by molecular-beam epitaxy. We report the c ...
The molecular-beam epitaxial growth conditions of (N + 1)(InAs)m/N(GaAs)n short period superlattices (SPSs) on GaAs substrates have been optimized. Hall electrical properties measured by the van der Pauw method were compared to low-temperature photolumines ...
The purpose of this work is to compare for thin film analysis, atomic force microscopy, a recently emerging tool, with well-established nuclear analysis techniques. The comparison is conducted using typical samples of InAs/GaAs heterostructures grown by mo ...
We report the growth behaviour of InP, InGaAs and InGaAsP on non-planar InP substrates where ridges were formed with (111)A, (211)A, (111)B and (551BAR) sidewall planes. All three materials grow uniformly on the whole patterned surface with (111)A and (211 ...
High strained InxGa1-xAs/GaAs quantum well (QW) structures have been grown by metalorganic molecular beam epitaxy (MOMBE) with the aim of investigating the capability of this epitaxial growth method in terms of thickness control. Emission lines from QWs wi ...
Photoluminescence (PL), reflectivity and thermally-detected optical absorption (TDOA) experiments have been carried out, at liquid helium temperatures, On In0.35Ga0.65As/GaAs quantum wells (QWs) with different thicknesses of 4, 6, 8 and 10 monolayers (MLs) ...
We studied the formation of buried heterostructures obtained in a single growth step over nonplanar substrates patterned with ridges. When the ridge dimensions are large enough, the growth on the mesa top is similar to that on a planar substrate. In contra ...
A Hall mobility as high as 176,200 cm2V-1s-1 at 77 K with N(d)-N(a) = 1.3 x 10(14) cm-3 has been obtained by adjusting the substrate and the phosphine cracker temperatures. The 2 K photoluminescence spectra show finely resolved excitonic transitions for la ...
