Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Strain Hardening Ultra High Performance Fiber Reinforced Concrete (SH-UHPFRC) were used successfully over the last 8 years in numerous cast in place rehabilitation applications as long lasting waterproofing layers (20 to 30 mm thickness) and, combined with ...
Ingots of an oxide dispersion strengthened reduced activation ferritic steel with the Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) chemical composition (in wt.%) were synthesized by mechanical alloying of elemental powders with 0.3 wt.% Y2O3 particles in a planetary ball ...
Ternary Au-Cu-Pt alloys, of unequal gold and copper atomic contents and containing 2.5 wt.% Pt, are ordered isothermally at 250 or 400 degrees C after annealing at 650 degrees C and quenching in water. The alloys are characterized by transmission electron ...
Copper-based composites reinforced with alumina particles are produced by two different pro- cesses, namely gas pressure driven infiltration of a porous alumina preform and a two-step in-situ process developed in the course of this work. The resulting comp ...
We present a process for the production of Cu-Al matrix composites containing between 25 and 30 vol.% in situ Al2O3. The composites are prepared by pressing, heat-treating and hot working blended powders of Cu, Al and CuO packed into copper alloy cans. The ...
An argon gas atomized, pre-alloyed Fe-14Cr-2W-0.3Ti (wt.%) reduced activation ferritic (RAF) steel powder was mechanically alloyed with 0.3wt.% Y2O3 nano-particles in an attritor ball mill and consolidated by hot isostatic pressing at 1150 °C under a press ...
The biomedical industry has an increasing demand for dissimilar metal joining processes, which are used for complex configuration designs, such as guidewires and other intravascular interventional devices. Their production becomes more and more challenging ...
Cu-Ni-Sn alloys with Pb additions exhibit high mechanical strength at room temperature coupled with good machinability but experience a significant ductility loss above the melting point of lead. We explore here the influence of minor additions of Al, Mn, ...
For the design of SFRC members, the most fundamental material property is its post cracking residual tensile strength. When relying on physical models to describe structural behaviour under load, the material laws must first be accurately established. If t ...
VIII International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS-82013
We extend the analysis of Hutchinson and Neale (Hutchinson JW, Neale KW. Acta Metall 1977;25:839) and Ghosh (Ghosh AK. Acta Metall 1977;25:1413) predicting the tensile elongation to failure of strain-rate-dependent plastic materials to two-phase composites ...