Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
At low frequencies, standing waves within the room cause large frequency-response variations in the listening environment, such as audio rooms or recording studios. This unwanted phenomenon has a significant impact on the sound quality of an audio system. ...
This paper presents a novel reading algorithm for an ironless inductive position sensor which exhibits immunity to single-frequency interference (both for high and low frequency signals). This algorithm is based on the three-parameter sine fitting, whose p ...
The recent advances made in MEMS and particularly in RF MEMS technology are enabling new architectures for the integration of RF transceivers with improved performance and smaller size. Several fundamental building blocks benefit from the availability of h ...
A novel frequency synthesizer with a strong emphasis on low-power consumption (2mW) was developed for this thesis. A BAW-resonator was used for the design of the high-frequency oscillator. The BAW's high Q-Factor ensured a minimal power consumption, while ...
We report on an application of a pulsed distributed feedback quantum cascade laser (QCL) for an open path data transmission. A pulse QCL in the 1046 cm(-1) range (28.7 THz) is used as a carrier signal source. The QCL is modulated with 50 ns pulses at repet ...
Spie-Int Soc Optical Engineering, Po Box 10, Bellingham, Wa 98227-0010 Usa2008
We report the fabrication and characterization of 30-nm-gate fully passivated AlInN/GaN high-electron mobility transistors (HEMTs) with cutoff frequencies f(T) and f(MAX) simultaneously exceeding 200 GHz at a given bias point. The current gain cutoff frequ ...
AlGaN/GaN HEMTs have been fabricated directly on (111) oriented single crystal diamond with 1.3 x 10(13) cm(-2) channel sheet charge density and 731 cm(2)/Vs mobility. 0.2 mu m gate length devices showed 0.73 A/mm maximum drain current density and f(T) and ...
The recent advances made in MEMS and particularly in RF MEMS technology are enabling new architectures for the integration of RF transceivers with improved performance and smaller size. Several fundamental building blocks benefit from the availability of h ...
In the first part of the paper, also in this issue of the JOURNAL, the design of the frequency synthesizer and receiver section of an FSK transceiver was described. It operates in the 434-MHz ISM (Industrial, Scientific, Medical) band and is realized in a ...
Following the trend in portable wireless communications, this dissertation explores new approaches to designing of power-critical building blocks in the elementary circuit level. Specifically, the work focuses on designs of baseband continuous-time Gm-C fi ...