Photodetectors, also called photosensors, are sensors of light or other electromagnetic radiation. There is a wide variety of photodetectors which may be classified by mechanism of detection, such as photoelectric or photochemical effects, or by various performance metrics, such as spectral response. Semiconductor-based photodetectors typically
photo detector have a p–n junction that converts light photons into current. The absorbed photons make electron–hole pairs in the depletion region. Photodiodes and photo transistors are a few examples of photo detectors. Solar cells convert some of the light energy absorbed into electrical energy.
Photodetectors can be classified based on their mechanism of operation and device structure. Here are the common classifications:
Photodetectors may be classified by their mechanism for detection:
Photoconductive effect: These detectors work by changing their electrical conductivity when exposed to light. The incident light generates electron-hole pairs in the material, altering its conductivity. Photoconductive detectors are typically made of semiconductors.
Photoemission or photoelectric effect: Photons cause electrons to transition from the conduction band of a material to free electrons in a vacuum or gas.
Thermal: Photons cause electrons to transition to mid-gap states then decay back to lower bands, inducing phonon generation and thus heat.
Polarization: Photons induce changes in polarization states of suitable materials, which may lead to change in index of refraction or other polarization effects.
Photochemical: Photons induce a chemical change in a material.
Weak interaction effects: photons induce secondary effects such as in photon drag detectors or gas pressure changes in Golay cells.
Photodetectors may be used in different configurations. Single sensors may detect overall light levels. A 1-D array of photodetectors, as in a spectrophotometer or a Line scanner, may be used to measure the distribution of light along a line.
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
Un photodétecteur (ou détecteur photosensible ou détecteur optique ou détecteur de lumière) est un dispositif (détecteur) qui transforme la lumière qu'il absorbe en une grandeur mesurable, généralement un courant ou une tension électrique. Le capteur à fibre optique repose sur ce principe. Photodétecteurs (simples) : photomultiplicateur (ou phototube ou tube photomultiplicateur) ; photoconducteur (ou détecteur photoconducteur) ; photodiode ; photodiode à avalanche.
Une cellule photovoltaïque, ou cellule solaire, est un composant électronique qui, exposé à la lumière, produit de l’électricité grâce à l’effet photovoltaïque. La puissance électrique obtenue est proportionnelle à la puissance lumineuse incidente et elle dépend du rendement de la cellule. Celle-ci délivre une tension continue et un courant la traverse dès qu'elle est connectée à une charge électrique (en général un onduleur, parfois une simple batterie électrique).
Un capteur photographique est un composant électronique photosensible servant à convertir un rayonnement électromagnétique (UV, visible ou IR) en un signal électrique analogique. Ce signal est ensuite amplifié, puis numérisé par un convertisseur analogique-numérique et enfin traité pour obtenir une . Le capteur est donc le composant de base des appareils photo et des caméras numériques, l'équivalent du film (ou pellicule) en photographie argentique.
The most important clinical diagnostic and therapeutic applications of light will be described. In addition, this course will address the principles governing the interactions between light and biolog
Ce cours introduit les spécificités des techniques relevant de l'optique moderne, en particulier les aspects touchant à la fréquence extrêmement élevée de l'onde et ceux liés à l'émission et la détect
Introduction to 0ptical imaging systems such as camera objectives and microscopes. Discussion of imaging formation. Principles of design of imaging optics with geometrical optics and analysis with ray
Explore les caractéristiques de l'énergie solaire, le transport thermique, l'électricité solaire, les semi-conducteurs et l'électrochimie pour la production de combustibles solaires.
Explique le fonctionnement des photodiodes p-i-n et des photodétecteurs d'avalanche.
Explore les principes de la détection de la lumière et divers types de détecteurs.
Graphene has some drawbacks, like the absence of an electronic band gap which leads to only small gate switching ratios, and its fast carrier recombination that limits its use in optoelectronics. In o
EPFL2016
Nowadays, efficient and remote health monitoring is becoming increasingly important, given both the ageing of population and the combined action of an increase in obesity level and cardiovascular dise
EPFL2020
Combining all the benefits of Fourier transform infrared (FTIR) spectroscopy in a chip scale spectroscopic sensor looks promising for mobile and wearable platform development. Dual-comb spectroscopy e