Êtes-vous un étudiant de l'EPFL à la recherche d'un projet de semestre?
Travaillez avec nous sur des projets en science des données et en visualisation, et déployez votre projet sous forme d'application sur Graph Search.
Concept
Direct-drive mechanism
Résumé
A direct-drive mechanism is a mechanism design where the force or torque from a prime mover is transmitted directly to the effector device (such as the drive wheels of a vehicle) without involving any intermediate couplings such as a gear train or a belt.
In the late 19th century and early 20th century, some of the earliest locomotives and cars used direct drive transmissions at higher speeds. Direct-drive mechanisms for industrial arms began to be possible in the 1980s, with the use of rare-earth magnetic materials. The first direct-drive arm was built in 1981 at Carnegie Mellon University.
Today the most commonly used magnets are neodymium magnets.
Direct-drive systems are characterized by smooth torque transmission, and nearly-zero backlash.
The main benefits of a direct-drive system are increased efficiency (due to reduced power losses from the drivetrain components) and being a simpler design with fewer moving parts. Major benefits also include the ability to deliver high torque over a wide range of speeds, fast response, precise positioning, and low inertia.
The main drawback is that a special type of electric motor is often needed to provide high torque outputs at low rpm. Compared with a multi-speed transmission, the motor is usually operating in its optimal power band for a smaller range of output speeds for the system (e.g., road speeds in the case of a motor vehicle).
Direct-drive mechanisms also need a more precise control mechanism. High-speed motors with speed reduction have relatively high inertia, which helps smooth the output motion. Most motors exhibit positional torque ripple known as cogging torque. In high-speed motors, this effect is usually negligible, as the frequency at which it occurs is too high to significantly affect system performance; direct-drive units will suffer more from this phenomenon unless additional inertia is added (i.e. by a flywheel) or the system uses feedback to actively counter the effect.
Source officielle
À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.