Mast radiatorA mast radiator (or radiating tower) is a radio mast or tower in which the metal structure itself is energized and functions as an antenna. This design, first used widely in the 1930s, is commonly used for transmitting antennas operating at low frequencies, in the LF and MF bands, in particular those used for AM radio broadcasting stations. The conductive steel mast is electrically connected to the transmitter. Its base is usually mounted on a nonconductive support to insulate it from the ground.
Television antennaA television antenna (TV aerial) is an antenna specifically designed for use with a television receiver (TV) to receive over-the-air broadcast television signals from a television station. Television reception is dependent upon the antenna as well as the transmitter. Terrestrial television is broadcast on frequencies from about 47 to 250 MHz in the very high frequency (VHF) band, and 470 to 960 MHz in the ultra high frequency (UHF) band in different countries.
Antenna feedA radio transmitter or receiver is connected to an antenna which emits or receives the radio waves. The antenna feed system or antenna feed is the cable or conductor, and other associated equipment, which connects the transmitter or receiver with the antenna and makes the two devices compatible. In a radio transmitter, the transmitter generates an alternating current of radio frequency, and the feed system feeds the current to the antenna, which converts the power in the current to radio waves.
Electrical lengthIn electrical engineering, electrical length is a dimensionless parameter equal to the physical length of an electrical conductor such as a cable or wire, divided by the wavelength of alternating current at a given frequency traveling through the conductor. In other words, it is the length of the conductor measured in wavelengths. It can alternately be expressed as an angle, in radians or degrees, equal to the phase shift the alternating current experiences traveling through the conductor.
Loading coilA loading coil or load coil is an inductor that is inserted into an electronic circuit to increase its inductance. The term originated in the 19th century for inductors used to prevent signal distortion in long-distance telegraph transmission cables. The term is also used for inductors in radio antennas, or between the antenna and its feedline, to make an electrically short antenna resonant at its operating frequency. The concept of loading coils was discovered by Oliver Heaviside in studying the problem of slow signalling speed of the first transatlantic telegraph cable in the 1860s.
Antenne ground planethumb|Antenne ground plane en quart d'onde au sol ou sur une surface conductrice quelconque grande devant la longueur d'onde. thumb|upright=0.62|Antenne ground plane dont les brins du plan de sol sont inclinés vers le bas. Une antenne ground plane ou antenne 1/4 d'onde ou GPA (Ground Plane Antenna) est un dipôle dans lequel on a remplacé la moitié par un « plan de sol », la moitié conservée étant normale à cette surface. Si le plan de sol est suffisamment grand, le demi-dipôle se comporte exactement comme un dipôle entier car sa réflexion dans le plan de sol forme la partie manquante.
Aperture (antenna)In electromagnetics and antenna theory, the aperture of an antenna is defined as "A surface, near or on an antenna, on which it is convenient to make assumptions regarding the field values for the purpose of computing fields at external points. The aperture is often taken as that portion of a plane surface near the antenna, perpendicular to the direction of maximum radiation, through which the major part of the radiation passes.
Antenne rideauthumb|Antennes rideaux HF de radiodiffusion à Wertachtal, Bavière thumb|Antenne rideau HF de quatre fois quatre éléments dipôle à Hörby, Suède Une Antenne rideau est une antenne directive pour les ondes courtes (décamétriques) qu’on utilise pour des émetteurs radio. L’objectif des services de radiodiffusion en ondes décamétriques est la couverture d’une zone géographique étendue. Pour cela, il faut avoir une puissance d’émission suffisante et une fréquence adaptée à la prévision ionosphérique.
TélécommunicationsLes télécommunications sont définies comme la transmission d’informations à distance en utilisant des technologies électronique, informatique, de transmission filaire, optique ou électromagnétique. Ce terme a un sens plus large que son acception équivalente officielle « communication électronique ». Elles se distinguent ainsi de la poste qui transmet des informations ou des objets sous forme physique.
Radiation resistanceRadiation resistance is that part of an antenna's feedpoint electrical resistance caused by the emission of radio waves from the antenna. In radio transmission, a radio transmitter is connected to an antenna. The transmitter generates a radio frequency alternating current which is applied to the antenna, and the antenna radiates the energy in the alternating current as radio waves. Because the antenna is absorbing the energy it is radiating from the transmitter, the antenna's input terminals present a resistance to the current from the transmitter.
