Microlithography is a general name for any manufacturing process that can create a minutely patterned thin film of protective materials over a substrate, such as a silicon wafer, in order to protect selected areas of it during subsequent etching, deposition, or implantation operations.
The term is normally used for processes that can reliably produce features of microscopic size, such as 10 micrometres or less. The term nanolithography may be used to designate processes that can produce nanoscale features, such as less than 100 nanometres.
Microlithography is a microfabrication process that is extensively used in the semiconductor industry and also manufacture microelectromechanical systems.
Specific microlithography processes include:
Photolithography using light projected on a photosensitive metarial film (photoresist).
Electron beam lithography, using a steerable electron beam.
Nanoimprinting
Interference lithography
Magnetolithography
Scanning probe lithography
Surface-charge lithography
Diffraction lithography
These processes differ in speed and cost, as well as in the material they can be applied to and the range of feature sizes they can produce. For instance, while the size of features achievable with photolithography is limited by the wavelength of the light used, the technique it is considerably faster and simpler than electron beam lithography, that can achieve much smaller ones.
The main application for microlithography is fabrication of integrated circuits ("electronic chips"), such as solid-state memories and microprocessors. They can also be used to create diffraction gratings, microscope calibration grids, and other flat structures with microscopic details.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Etching is used in microfabrication to chemically remove layers from the surface of a wafer during manufacturing. Etching is a critically important process module, and every wafer undergoes many etching steps before it is complete. For many etch steps, part of the wafer is protected from the etchant by a "masking" material which resists etching. In some cases, the masking material is a photoresist which has been patterned using photolithography. Other situations require a more durable mask, such as silicon nitride.
This course gives the basics for understanding nanotechnology from an engineer's perspective: physical background, materials aspects and scaling laws, fabrication and imaging of nanoscale devices.
This project presents a microfabrication method for new generation particle detectors. This microsystem is supposed to detect ionizing radiation such as alpha particles, beta particles, and gamma rays. This project aims to miniaturized the otherwise well k ...
2021
,
Microstereolithography is a 3D microfabrication technology that is fundamentally different from the techniques commonly used in cleanroom environment for the manufacturing of MEMS components. Most microfabrication techniques evolved from the microelectroni ...
Retinitis Pigmentosa and age-related macular degeneration are two of the principal causes of blindness in industrialized countries, for which there is still no established prevention, treatment or cure. In the past decade, retinal prostheses emerged as pro ...