Summary
Atomic emission spectroscopy (AES) is a method of chemical analysis that uses the intensity of light emitted from a flame, plasma, arc, or spark at a particular wavelength to determine the quantity of an element in a sample. The wavelength of the atomic spectral line in the emission spectrum gives the identity of the element while the intensity of the emitted light is proportional to the number of atoms of the element. The sample may be excited by various methods. The sample of a material (analyte) is brought into the flame as a gas, sprayed solution, or directly inserted into the flame by use of a small loop of wire, usually platinum. The heat from the flame evaporates the solvent and breaks intramolecular bonds to create free atoms. The thermal energy also excites the atoms into excited electronic states that subsequently emit light when they return to the ground electronic state. Each element emits light at a characteristic wavelength, which is dispersed by a grating or prism and detected in the spectrometer. A frequent application of the emission measurement with the flame is the regulation of alkali metals for pharmaceutical analytics. Inductively coupled plasma atomic emission spectroscopy Inductively coupled plasma atomic emission spectroscopy (ICP-AES) uses an inductively coupled plasma to produce excited atoms and ions that emit electromagnetic radiation at wavelengths characteristic of a particular element. Advantages of ICP-AES are the excellent limit of detection and linear dynamic range, multi-element capability, low chemical interference and a stable and reproducible signal. Disadvantages are spectral interferences (many emission lines), cost and operating expense and the fact that samples typically must be in a liquid solution. Inductively coupled plasma (ICP) source of the emission consists of an induction coil and plasma. An induction coil is a coil of wire that has an alternating current flowing through it. This current induces a magnetic field inside the coil, coupling a great deal of energy to plasma contained in a quartz tube inside the coil.
About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related courses (12)
MSE-487: Mathematical methods for materials science
The aim of the course is to review mathematical concepts learned during the bachelor cycle and apply them, both conceptually and computationally, to concrete problems commonly found in engineering and
CH-309: Experimental analytical chemistry
Les travaux pratiques ont pour but de familiariser les étudiants aux principes qualitatifs et quantitatifs de la chimie analytique. Ces travaux pratiques sont une illustration du cours "méthodes de sé
CH-309(a): Experimental analytical chemistry
Les travaux pratiques ont pour but de familiariser les étudiants aux principes qualitatifs et quantitatifs de la chimie analytique. Ces travaux pratiques sont une illustration du cours "méthodes de sé
Show more