Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Fracture toughness tests are conducted at room temperature and 923 K (650 degrees C) on SENB (Single Edge Notched Bend) specimens of three different (alpha(2) + gamma ) TiAl-based alloys. One alloy is a conventional near fully lamellar Ti-45Al-2Mn-2Nb + 0. ...
The crystallography of martensite formed in 0.2C-2.0Mn-1.5Si-0.6Cr steel was studied using the electron backscattered diffraction (EBSD) technique. The results showed that the observed orientation relationship (OR) was closer to that of Nishiyama-Wasserman ...
The crystallography of martensite formed in 0.2C-2.0Mn-1.5Si-0.6Cr steel was studied using the EBSD technique. The results showed that the observed orientation relationship was closer to the Nishiyama- Wassermann (N-W) than to the Kurdjumov-Sachs (K-S) ori ...
Ferritic/martensitic (FM) steels, F82H and Optimax-A, were irradiated up to 11.3 dpa/1175 appm He in Target-3 of the Swiss Spallation Neutron Source (SINQ). To investigate helium-induced hardening effect, micro-hardness and microstructure of the irradiated ...
In the present work, LBE (lead-bismuth eutectic) embrittlement effects on ferritic/martensitic (FM) steels have been studied by conducting slow-strain-rate tensile (SSRT) testing on T91 and F82H steels either in Ar or in liquid LBE after irradiation to dos ...
A systematic study of the solidification mechanisms of binary Sn-Cu and ternary Sn-Cu-Ni alloys has been carried out. It is found that Sn-Cu is a weakly-irregular eutectic system with Cu6Sn5 as the leading phase. Interestingly, two different eutectic morph ...
Three binary Sn-Cu solder alloys of near-eutectic composition have been directionally solidified at different growth rates. The competition between primary tetragonal Sn cells/dendrites and eutectic is interpreted with the coupled zone concept. It is also ...
AlN films are employed in RF filters for wireless communication. We report on enhanced coupling factors k(t)(2) obtained by partial substitution of Al by Sc. Al0.88Sc0.12N films were deposited by reactive magnetron sputtering from an Al0.9Sc0.1 alloy targe ...
Five ternary Sn-0.7Cu-xNi alloys with nickel contents in the range 0-1000 ppm have been directionally solidified at different growth rates. The competition between primary tetragonal Sn cells/dendrites, eutectic and primary Cu6Sn5 is interpreted with phase ...
The combined influence of prior plastic strain in austenite and applied stress in the course of the transformation on the crystallographic texture of bainitic steel was studied. The experimental data were obtained using electron back scatter diffraction an ...
