Controlling the aspect ratio of quantum dots: From columnar dots to quantum dots
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The growth of InGaN layers was carried out by molecular beam epitaxy (MBE). The nitrogen precursor was ammonia. The optical and structural properties of the InGaN layers have been investigated by transmission electron microscopy (TEM), x-ray diffraction (X ...
By using chemical beam epitaxy at growth temperatures as low as 460-480 degrees C, we have overcome strain relaxation problems that prevented so far the successful use of InAsP quantum wells in 1.55 mu m lasers. Five quantum well InAsP/InGaAsP horizontal c ...
Microcavity light emitting diodes (MCLEDs) present several interesting features compared to conventional LEDs such as narrow linewidth, improved directionality and high efficiency. We report here on MCLEDs with a top emitting geometry. The MCLED layers wer ...
GaN quantum dots (QDs) in an AlN matrix have been grown on Si(111) by molecular-beam epitaxy. The growth of GaN deposited at 800 degrees C on AlN has been investigated in situ by reflection high-energy electron diffraction. It is found that a growth interr ...
Ammonia has been used to grow GaN layers by molecular beam epitaxy on c-plane sapphire substrates. The ratio of nitrogen to Ga active species, i.e., the actual V/III ratio, has been varied from 1 to 4. It is found that increasing the V/III ratio improves t ...
The Zn/Se flux ratio employed during the early stages of molecular beam epitaxy of pseudomorphic ZnSe/GaAs(001) as well as lattice-matched ZnSe/In0.04Ga0.96As(001) heterostructures controls the density of the native stacking faults, which have been associa ...
Photoluminescence intensity and emission wavelength of InAsP/InGaAsP and InGaAs/InGaAsP multi-quantum well (MQW) laser structures grown by chemical beam epitaxy (CBE) at 460 degrees C and V/III ratio of 2 are considerably affected by annealing at temperatu ...
Chemical beam epitaxy (CBE) grown InAsP/InGaAsP edge-emitting laser diodes on GaAs substrates obtained by localised fusion in a nitrogen environment exhibit high quality fused interfaces. A degradation of fused lasers is observed which is attributed to the ...
Thermally detected optical absorption measurements have been performed at liquid helium temperature in order to study the effects of In segregation on the optical properties of InxGa1-xAs/GaAs quantum wells grown by molecular-beam epitaxy under various gro ...
We have recently shown that in II-VI/III-V heterojunctions and related devices fabricated by molecular beam epitaxy, the II/VI flux ratio employed during the early stages of II-VI growth can be used to control the local interface composition and the band a ...