Publication

Annealing of Silicon Heterojunction Solar Cells: Interplay of Solar Cell and Indium Tin Oxide Properties

Related publications (35)

III-V Nitride Semiconductors Deposited At Low Temperature For Photovoltaic Applications

This thesis reports on the study and use of low temperature processes for the deposition of indium gallium nitride (InGaN) thin films in order to alleviate some of the present drawbacks of its monolitic deposition on silicon for photovoltaic applications. ...

EPFL2023

Electrical Losses Mitigation in Silicon Heterojunction Solar Cells

Laurie-Lou Senaud

To overcome the worldwide challenges of climate change, photovoltaics is foreseen to play a significant role in the world electricity production. Nowadays, single junction crystalline silicon (c-Si) based solar cells hold the largest share of the global ph ...

EPFL2021

Lateral transport in silicon solar cells

Christophe Ballif, Gabriel Christmann, Mathieu Gérard Boccard, Jan Haschke

We investigate lateral charge carrier transport in crystalline silicon solar cells. Under typical operation illumination of high-efficiency solar cells, a significant population of electrons and holes exist in the silicon wafer, leading to a non-negligible ...

AIP2020

Optimization of front SiNx/ITO stacks for high-efficiency two-side contacted c-Si solar cells with co-annealed front and rear passivating contacts

Christophe Ballif, Franz-Josef Haug, Xavier Niquille, Andrea Ingenito, Sylvain Nicolay, Frank Meyer

In this contribution, we present an electron selective passivating contact metallised with a low temperature process to target front side applications in crystalline silicon (c-Si) solar cells. In addition to an interfacial silicon oxide (SiOx) and an in-s ...

2020

Defect passivation in zinc tin oxide: improving the transparency-conductivity trade-off and comparing with indium-based materials

Oscar Esteban Rucavado Leandro

Transparent conductive oxides (TCOs) are essential in technologies coupling light and electricity. Due to their good optoelectronic properties and the production scalability, Sn-doped indium oxide (In2O3:Sn) is the preferred TCO in industrial applications. ...

EPFL2019

Impact of the Oxygen Content on the Optoelectronic Properties of the Indium-Tin-Oxide Based Transparent Electrodes for Silicon Heterojunction Solar Cells

Christophe Ballif, Mathieu Gérard Boccard, Jan Haschke, Jean Cattin, Brahim Aissa, Akshath Raghu Shetty

Amorphous/crystalline silicon heterojunction (SHJ) solar cells technology is attracting tremendous attention in recent years due to its potential to achieve high power conversion efficiencies at low fabrication temperatures and using few process steps. How ...

AMER INST PHYSICS2019

Passivation, conductivity, and selectivity in solar cell contacts: Concepts and simulations based on a unified partial-resistances framework

Mathieu Gérard Boccard

Passivation, conductivity, and selectivity are often acknowledged as the three requirements for optimal contacts to photovoltaic solar cells. Although there are generally accepted definitions and metrics for passivation and conductivity, a common understan ...

2019

Contact Resistivity of the p-Type Amorphous Silicon Hole Contact in Silicon Heterojunction Solar Cells

Mathieu Gérard Boccard

In silicon heterojunction solar cells made with high-lifetime wafers, resistive losses in the contacts dominate the total electrical power loss. Moreover, it is widely believed that the hole contact stack—a-Si:H(i)/a-Si:H(p)/ITO/Ag—is responsible for more ...

2019

Contributions to the contact resistivity in fired tunnel-oxide passivating contacts for crystalline silicon solar cells

Christophe Ballif, Franz-Josef Haug, Andrea Ingenito, Sofia Libraro, Frank Meyer

We investigate the contact resistivity of p-type passivating contacts for silicon solar cells. Our contact structures are compatible with firing, a rapid annealing process similar to the one used for sintering of the screen-printed metallisation in solar c ...

2019

Optoelectronic Properties of Layered Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Sanghyun Paek, Yonghui Lee, Kyung Taek Cho

Herein, the optoelectronic properties of interface-engineered perovskite 2D|3D-heterojunction structure solar cells are reported. The reciprocity theorem is applied to determine the maximum open-circuit voltage (V-oc) the device can deliver under solar ill ...

2019

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.