Êtes-vous un étudiant de l'EPFL à la recherche d'un projet de semestre?
Travaillez avec nous sur des projets en science des données et en visualisation, et déployez votre projet sous forme d'application sur Graph Search.
Concept
Robot articulé
Résumé
An articulated robot is a robot with rotary joints (e.g. a legged robot or an industrial robot). Articulated robots can range from simple two-jointed structures to systems with 10 or more interacting joints and materials.
They are powered by a variety of means, including electric motors.
Some types of robots, such as robotic arms, can be articulated or non-articulated.
Image:Factory Automation Robotics Palettizing Bread.jpg|Robots palletizing food (Bakery)
Image: Robotics Cutting Bridge Building Parts.jpg|Manufacturing of steel bridges, cutting steel
Image:KUKA robot for flat glas handling.jpg|Flat-glass handling, heavy duty robot with 500 kg payload
Image:Automation of foundry with robot.jpg|Automation in foundry industry, heat resistant robot
Image:Robotworx-spot-welding-robot.jpg|Spot Welding Robot
Articulated Robot:
See Figure. An articulated robot uses all the three revolute joints to access its work space.
Usually the joints are arranged in a “chain”, so that one joint supports another further in the chain.
Continuous Path:
A control scheme whereby the inputs or commands specify every point along a desired path of motion. The path is controlled by the coordinated motion of the manipulator joints.
Degrees Of Freedom (DOF):
The number of independent motions in which the end effector can move, defined by the number of axes of motion of the manipulator.
Gripper:
A device for grasping or holding, attached to the free end of the last manipulator link; also called the robot’s hand or end-effector.
Payload:
The maximum payload is the amount of weight carried by the robot manipulator at reduced speed while maintaining rated precision. Nominal payload is measured at maximum speed while maintaining rated precision. These ratings are highly dependent on the size and shape of the payload.
Pick And Place Cycle:
See Figure. Pick and place Cycle is the time, in seconds, to execute the following motion sequence: Move down one inch, grasp a rated payload; move up one inch; move across twelve inches; move down one inch; ungrasp; move up one inch; and return to start location.
Source officielle
À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.