Reza Soleiman Zadeh Ardebili
The international actions against global warming demands reductions in carbon emission and more efficient use of energy. Energy efficiency in the conversion and use of electricity, as an important form of energy in the modern life, has strong environmental and economical impacts. Power electronic devices determining roles in the overall system efficiency in many applications such as power converters and inverters. Gallium Nitride (GaN) devices have emerged as an superior alternative to the silicon devices and enabled unprecedented efficiencies. GaN-based high electron-mobility transistors (HEMTs) offer excellent characteristics such as high switching speed, low switching and conduction losses, small device size and high power density capabilities. However, such significant increases in the power density and the reduction of device size comes at the price of dramatic increases in the heat fluxes and appearance of hot spots in the device footprint that cannot be addressed using conventional methods. The integration of diamond and GaN has been highly pursued for thermal management purposes as well as combining their exceptional complementary properties for power electronics applications and novel semiconductor heterostructures. In this thesis, we discuss the key hindrances towards realisation of diamond on GaN substrates and devices, and we propose novel solutions for improving the feasibility of diamond-on-GaN integration for efficient thermal management of hot spots in GaN devices and development of diamond devices integrated with GaN devices in the same chip.The growth of diamond on GaN is challenging due to the high lattice and thermal expansion mismatches. The weak adhesion of diamond to GaN and high residual stresses after the deposition often result in the diamond film delamination or development of cracks, which prevents the subsequent device fabrication. In this thesis, a new seed dibbling method is presented for seeding and growing high-quality diamond films on cost-effective GaN-on-Si substrates, which result in significantly larger diamond grains and lower residual stresses (as low as 0.2 GPa) compared to conventional methods. Moreover, the excellent adhesion obtained by this method enabled a reliable polishing of the as-grown diamond films on GaN-on-Si without any delamination, resulting in smooth diamond-on-GaN substrates with sub-nanometer roughness. The high temperature hot spots in GaN devices are addressed by the near-junction heat spreaders using diamond films deposited on GaN. An analytical model for the heat spreading is presented to analyse the performance and optimize the heat spreaders, considering the geometry and thermal conductivity of the heat spreader and the substrate. Experimental demonstration of diamond heat spreaders on vertical GaN diodes together with the thermal characterization of their behaviour shows significant reduction of thermal spreading resistances, hot spot temperatures and temperature gradients from the device footprint, which highlights the impact of such heat spreaders for the thermal management of high power density GaN devices.The diamond films deposited on GaN were also used to demonstrate high-performance diamond transistors integrated on AlGaN/GaN-on-Si substrates with characteristics such as high breakdown voltage, high current density, and high on/off ratio, which opens many new possibilities for the development of power ICs with complementary logics, gate drivers and power
EPFL2021
